液压剪板机软启动装置如何安装？液压剪板机软启动器的安装问题要仔细检查液

How hydraulic shears soft-start device installed? <br>Installation of hydraulic shears soft starter <br>to double-check hydraulic shears soft starter's main circuit and control circuit, to see whether the wiring errors. <br>The shears soft starter switch on the front panel to select the connection mode of the motor in the motor S1 dial "external" position. <br>Cf. standard parameters ABB soft starter sheets, the basic setting of different applications, the soft starter to start the front panel knob ramp time set to 10 seconds, to limit starting current dial to 3 times. <br>After the power transmitting hydraulic shearing main loop, the control system gives the soft start signal, the main motor starts shears. For the best start parameters, you can repeat the test. <br>Soft start ramp time is set to a starter 6 seconds, starting current limit is set to 2.8 times.

How is the hydraulic shear erlet installed?<br>Installation of the soft starter of the hydraulic shear machine<br>Carefully inspect the main and control circuits of the hydraulic shears' soft starters for wiring errors.<br>The switch S1 on the front panel of the shear machine soft starter for selecting the mode of motor connection is dialed in the "external" position of the motor.<br>Compared with ABB soft starter product specification, the standard parameters in the basic settings of different applications, set the start ramp time knob on the front panel of the soft starter to 10 seconds and the start current limit knob to 3 times.<br>After the main circuit of the hydraulic shear machine is powered, the control system gives the soft start signal and the main motor of the shear machine starts. In order to obtain the best start-up parameters, you can repeat the experiment.<br>The start ramp time for the soft starter is set to 6 seconds and the start-up current limit is set to 2.8 times.

How to install the soft start device of hydraulic shearing machine?<br>Installation of soft starter of hydraulic plate shears<br>Carefully check the main circuit and control circuit of the soft starter of the hydraulic shearing machine to see if there is any wiring error.<br>Turn the switch S1 on the front panel of the soft starter of the shearing machine for selecting the motor connection mode to the "external connection" position of the motor.<br>According to the abb soft starter product manual and the standard parameters in the basic settings of different applications, set the start ramp time knob on the front panel of the soft starter to 10 seconds and the start current limit knob to 3 times.<br>After the main circuit of the hydraulic plate shearing machine is powered on, the control system gives a soft start signal and the main motor of the plate shearing machine starts. In order to obtain the best starting parameters, the test can be repeated.<br>The starting ramp time of the soft starter is set to 6 seconds and the starting current limit is set to 2.8 times.