控制用的触摸屏或PC位置， 需考虑员工上下料、处理异常和维修人员的就近

The position of the touch screen or PC for control should consider the staff's loading and unloading, handling abnormalities and maintenance personnel's nearby operation principles (try to avoid abnormal locations away from the control interface). If possible, it is recommended to use a control interface that can rotate 360° around the equipment Structural form or split screen mode, etc.

For the location of touch screen or PC used for control, the principles of loading and unloading, handling abnormalities and nearby operation of maintenance personnel shall be considered (try to avoid the location prone to abnormalities away from the control interface). If possible, it is recommended to adopt the structure form or split screen mode in which the control interface can rotate 360 ° around the equipment.<br>

The position of the touch screen or PC used for control shall take into account the principle of loading and unloading by employees, handling abnormalities and nearby operation by maintenance personnel (try to avoid the position prone to abnormalities being far away from the control interface). If possible, it is recommended to adopt the structure or split screen mode that the control interface can rotate around the equipment by 360 degrees.