1.将电子天平交给计量进行维修。2.如果维修不好，则需启动变更，购买新

1. Submit the electronic balance to the meter for repair. <br>2. If the repair is not good, you need to start the change and buy a new electronic balance to replace the electronic balance number A-FM01-Y33-03. <br>3. Upgrade the operating procedure for isolator cleaning (H3-SOP-20041), and change the description of "Isolator drying before moving the electronic balance and sealer back to the original isolator" description Afterwards, it is necessary to use both hands to move the electronic balance and the sealing machine back to the original place of the isolator." <br>4. All refined personnel in the 103 workshop shall be trained after the upgraded version of the isolator cleaning operation procedure (H3-SOP-20041): Emphasize on transferring When using an electronic balance, you must operate it with both hands to ensure that the electronic balance is firmly grasped before transferring.

1. Hand over the electronic balance to the meter for repair.<br>2. If the repair is not good, you need to initiate the change and purchase a new electronic balance replacement number A-FM01-Y33-03 electronic balance.<br>3. The isolation device cleaning operating procedure (H3-SOP-20041) is upgraded, in the "isolator dry, can the electronic balance and sealer back to the original place of the isolator" description changed to "after the isolator dry, the need to use both hands to move the electronic balance and sealer back to the original isolator." ”<br>4. All refined personnel in the 103 workshop for the isolation cleaning operating procedures (H3-SOP-20041) after the upgrade training: emphasis on the transfer of electronic days, must be two-handed operation, to ensure that the electronic balance grasp, and then transfer operations.

1. Hand over the electronic balance to Metrology Department for maintenance.<br>2. If the maintenance is not good, it is necessary to start the change and purchase a new electronic balance to replace the electronic balance No. a-fm01-y33-03.<br>3. Upgrade the operation procedure for isolator cleaning (h3-sop-20041), and change the description of "after the isolator is dry, move the electronic balance and sealing machine back to the original place of the isolator" to "after the isolator is dry, move the electronic balance and sealing machine back to the original place of the isolator with two hands."<br>4. All refining personnel in 103 workshop were trained after upgrading the operating procedures for isolator cleaning (h3-sop-20041): it was emphasized that when transferring the electronic balance, it should be operated with both hands to ensure that the electronic balance was firmly grasped before transferring.<br>