将会在运送和运用过程中呈现掉落的现象，出现这种问题的原因跟上个问题恰恰

It will appear to drop during transportation and use. The reason for this problem is exactly the opposite of the previous one. The biggest possibility is that the viscosity of the adhesive used when maintaining the film product at the time of production is not good. <br> <br>2. The peeling of PE maintenance film products is difficult. When the profile product device is peeled off, the maintenance film cannot be effectively peeled off. There are two possibilities. In this case, the maintenance film is of course very good at the time of posting, but it will be very difficult to peel off. This is also the most common problem of maintenance films produced by manufacturers of illegal maintenance film products. <br> <br>3. The PE maintenance film will be outstanding in the center for a period of time, but the wings are raised. The main reason for this phenomenon is that the maintenance film is stretched to a greater extent during the posting process with the maintained profile. In case of high temperature environment, it shows unnecessary shrinkage. <br> <br>4. The most reflected by PE users is the problem of degumming of the protective film products. This problem is most reflected in the profile protection film. When the user tears the protective film off the profile surface after the profile installation is completed, the protective film shows the viscose It does not follow the protective film, but remains on the profile product, which is the last thing users want to see. <br> <br>5. Although PE protective film products can be effectively peeled off, there are protective film expressions on the surface of the profile. This problem often occurs on some low-level protective film products. This is because the protective film is combined with the protected profile. At that time, there is a kind of chemical interaction that occurs in a suitable environment such as sunlight and moisture.

Will be in the process of transport and use of the phenomenon of drop, the cause of this problem is the opposite of the problem, the greatest possibility is that the maintenance film products in the production of the use of sensitive adhesive viscosity is not good.<br> <br>2, PE maintenance film product peeling difficulties, in the profile product device completed to peel, maintenance film can not be useful peeling, the reason for which there are two possibilities, one is to maintain membrane products used in the allergen is not the maintenance film special allergen, if so, the maintenance film in the time of posting of course very good, but when stripping will be very difficult, this is also some illegal maintenance film products manufacturers produced maintenance film the most common problem.<br> <br>3, PE maintenance film in the use of a period of time in the future center reflects outstanding, but the two wings, the primary reason for this phenomenon is that the maintenance film in the process of posting with the maintenance profile, its stretching degree is greater, in the future, in the hot environment, showing unnecessary retraction phenomenon.<br> <br>4, PE users reflect the most is the protection film product de-glue problem, this problem in the profile protection film reflects the most, when the user will be the profile installation and construction after the protective film from the surface of the profile to tear off, the protective film performance of the adhesive is not with the protective film, but left on the profile products, this is the user's last desire to see.<br> <br>5, PE protective film products can effectively peel but in the profile surface residual protective film performance words, this problem in some low-grade protective film products often appear, because the protective film in combination with the protected profile, when there is a suitable environment such as sunlight moisture, and occurred a chemical cooperation.

It will drop in the process of transportation and application. The reason for this problem is the opposite of the previous one. The most likely reason is that the viscosity of sensitive glue used in the production of maintenance membrane products is not good.<br>2. It is difficult to peel the PE maintenance film. When the profile product device is peeled, the maintenance film cannot be peeled effectively. There are two possibilities. One is that the sensitive adhesive used for maintenance film product is not the special sensitive adhesive for maintenance film. If so, the maintenance film will work very well when it is posted, but it will be very difficult when it is peeled, which is also some illegal dimension The most common problems of the protective film produced by the manufacturer.<br>3. The PE maintenance film will be outstanding in the future after being used for a period of time, but the main reason for this phenomenon is that the stretching degree of the maintenance film is relatively large during the posting process with the maintained profile. In the future, in case of high temperature environment, it will show unnecessary retraction phenomenon.<br>4. PE users mostly reflect the degumming problem of the protective film products, which is most reflected in the profile protective film. When users tear the protective film off the profile surface after the installation and construction of the profile, the adhesive displayed by the protective film does not follow the protective film, but remains on the profile products, which is the last thing users want to see.<br>5. Although PE protective film products can be effectively peeled off, there are still words of protective film on the surface of profile. This problem often occurs on some low-level protective film products. This is because when the protective film is combined with the protected profile, it meets the suitable environment such as sunlight and water content, which is a combination effect.<br>