1.设备控制为PLC控制:在正常生产时,设置多重安全保护。2.床身为钢

1. PLC control device to control: in normal production, set up multiple security. <br>2. Bed as welded steel plate: tempered to remove the internal stress; avoid deformation of the fuselage. <br>3. A forming stand as cast iron: after tempering; high strength, and long service life. <br>4. A roller shaft material is 40Cr: treated quenching; hardness HB280. <br>The mold material is GCr15: quenching; hardness HRC56-62 ℃. <br>6. The gearbox and transmission structure of: forming each rack has a gear box, the device can be guaranteed over time, high-intensity operation. And long life.

1. Equipment control for PLC control: in normal production, set up multiple safety protection.<br>2. The bed is a steel plate welding part: tempering treatment, eliminating internal stress;<br>3. Forming frame for cast iron structure: tempered treatment;<br>4. The material of the roller shaft is 40Cr: the treatment is adjusted, and the hardness is HB280.<br>5. The material of the molded mold is GCr15: quenching treatment, and the hardness is HRC56-62 degrees C.<br>6. The transmission structure is gearbox drive: each molding frame has a gearbox, to ensure that the equipment is over-time, high-intensity operation. And long service life.

1. The equipment is controlled by PLC: in normal production, multiple safety protections are set.<br>2. The bed is made of steel plate weldment: tempering treatment, internal stress elimination; avoiding deformation of the body.<br>3. The forming frame is of cast iron structure: tempered; high strength and long service life.<br>4. The material of roller shaft is 40Cr: after quenching and tempering treatment; the hardness is hb280.<br>5. The material of forming mould is GCr15: quenching treatment; hardness is hrc56-62 ℃.<br>6. The transmission structure is gearbox transmission: each forming frame has a gearbox, which can ensure the equipment to run over time and with high strength. And the service life is long.<br>