轨道连接件ST系列物料悬挂输送系统是由不同截面规格的滑轨组成的物料悬挂

Rail connection <br>ST series material suspension conveyor system is a material suspension conveyor system composed of slide rails of different cross-section specifications, where the rail connection is generally used for interconnection and fixation between rails and rails. <br>The styles of track connectors are diverse, and they are distinguished according to the installation form. <br>There are E-type connectors, π-type connectors, and B-type connectors. <br>Welding machine trolley The <br>welding machine trolley is used with the welding machine spreader and is installed in the track. The parallel track sliding is used to suspend auxiliary tools or other heavier equipment or products. With bearings, it runs smoothly and has low noise. <br>In addition to welding machine pulleys, similar pulleys also have combined pulleys. <br>The combined pulley slides on the corresponding I-beam, and auxiliary tools or other heavy equipment or products can also be suspended below. <br>The welding machine spreader is <br>used to connect the auxiliary tool between the suspended object and the trolley. The length of the spreader can be adjusted up and down, and the installation direction can be adjusted 90 ° left and right. <br>End cover and buffer The <br>end cover and buffer are installed at the end of the track, the buffer plays a buffer and noise reduction role; the end cover plays a secondary protection role to prevent the trolley from sliding out of the track, increasing the safety of the system operation. <br>The buffer is divided into rubber buffer block, bidirectional buffer and unidirectional buffer.

Track connectors<br>ST series material suspension conveyor system is a material suspension transport system consisting of different cross-sectional specifications of the rail, wherein the track connection is generally used for the track and track between the mutual connection, fixed.<br>Track connectors are styled in a variety of ways and vary according to the type of installation.<br>There are E-type connectors, type-type connectors, B-type connectors.<br>Welder carriage<br>Welding machine carriage solder with the use of welder crane, installed in the track, parallel track sliding for hanging auxiliary tools or other heavy equipment or products, the carriage has four wheels sliding and has two guide wheels, the wheel has bearings, smooth operation, noise.<br>In addition to the welder carriage, similar carriages have a combined carriage.<br>The combined carriage glides on the corresponding steel and can also hang auxiliary tools or other heavier equipment or products below.<br>Welder slings<br>Auxiliary tools for connecting the suspended object to the carriage, the length of the lifting can be adjusted up and down, and the mounting direction can be adjusted to about 90 degrees.<br>End cover and buffer<br>The end cover and buffer are installed on the track end, the buffer acts as a buffer and noise reduction, and the end cover acts as a secondary protection to prevent the carriage from sliding off the track, which increases the safety of the system operation.<br>The buffer is divided into rubber buffer block, two-way buffer, one-way buffer.

Rail connection<br>ST series material suspension conveying system is a material suspension conveying system composed of slideways with different cross-section specifications, in which the rail connectors are generally used for the interconnection and fixation between the rails.<br>There are various styles of rail connectors, which are distinguished according to different installation forms.<br>There are E-type connector, π type connector and B-type connector respectively.<br>Welder pulley<br>The welding machine pulley is used in conjunction with the welding machine sling and installed in the track. The parallel track sliding is used to hang auxiliary tools or other heavy equipment or products. The pulley has four-wheel sliding and two guide wheels, with bearings in the middle of the wheel, which is stable in operation and low in noise.<br>In addition to welding tackle, similar tackle also has combined tackle.<br>The combined pulley slides on the corresponding I-beam and can also hang auxiliary tools or other heavy equipment or products below.<br>Welder hanger<br>It is used to connect the auxiliary tools between the suspended object and the pulley. The length of the spreader can be adjusted up and down, and the installation direction can be adjusted 90 ° left and right.<br>End cover and buffer<br>The end cover and buffer are installed at the end of the track, and the buffer plays the role of buffer and noise reduction; the end cover plays the role of secondary protection to prevent the pulley from sliding out of the track, which increases the safety of the system operation.<br>Buffer is divided into rubber buffer block, bidirectional buffer and unidirectional buffer.<br>