焊机滑车配合焊机的吊具使用，安装于轨道内，其平行于轨道滑动并用于悬挂辅

The welding machine trolley is used in conjunction with the welding machine's spreader and is installed in the track. It slides parallel to the track and is used to suspend auxiliary tools or other heavy equipment or products. The pulley adopts four-wheel sliding and has two guide wheels, and the bearing is in the middle of the wheel, which runs smoothly and has low noise. <br>In addition to welding machine blocks, similar blocks also include modular blocks. <br>The combined pulley slides on the corresponding I-beam, and auxiliary tools or other heavy equipment or products can also be suspended below. <br>Welding machine spreader is <br>an auxiliary tool used to connect the suspended object and the trolley. The length of the spreader can be adjusted up and down, and the installation direction can be adjusted 90 ° left and right. <br>The end <br>cover and the buffer are installed at the end of the track. The buffer plays a role of buffering and noise reduction; the end cover plays a secondary protection role to prevent the trolley from sliding out of the track. Usage has been increased. <br>The buffer is divided into rubber buffer block, bidirectional buffer and unidirectional buffer.

The welder trolley is used in conjunction with the soldering device of the welder and is installed in the track, which slides parallel to the track and is used for hanging aids or other heavier equipment or products. The carriage uses four-wheel sliding and has two guide wheels, which have bearings in the wheel, and run smoothly and make little noise.<br>In addition to the welder carriage, similar carriages include a combined carriage.<br>The combined carriage glides on the corresponding steel and can also hang auxiliary tools or other heavier equipment or products below.<br>Welder slings<br>An auxiliary tool for connecting the suspended object to the carriage, the length of the lifting can be adjusted up and down, and the mounting direction can be adjusted to about 90 degrees.<br>End cover and buffer<br>The end cover and buffer are installed at the end of the track, the buffer acts as a buffer and noise reduction function, and the end cap acts as a secondary protection to prevent the carriage from sliding off the track, and the safety of the system operation is increased through the use of both.<br>The buffer is divided into rubber buffer block, two-way buffer, one-way buffer.

The welding machine pulley is used in conjunction with the lifting appliance of the welding machine and installed in the track. It slides parallel to the track and is used to hang auxiliary tools or other heavy equipment or products. The pulley adopts four-wheel sliding and has two guide wheels, with bearings in the middle of the wheels, so it runs stably and has low noise.<br>In addition to welding tackle, similar tackle also includes combined tackle.<br>The combined pulley slides on the corresponding I-beam and can also hang auxiliary tools or other heavy equipment or products below.<br>Welder hanger<br>The utility model relates to an auxiliary tool for connecting the suspended object and the pulley. The length of the lifting appliance can be adjusted up and down, and the installation direction can be adjusted 90 ° left and right.<br>End cover and buffer<br>The end cover and buffer are installed at the end of the track, and the buffer plays the role of buffer and noise reduction; the end cover plays the role of secondary protection to prevent the pulley from sliding out of the track, and the safety of the system operation is increased through the use of both.<br>Buffer is divided into rubber buffer block, bidirectional buffer and unidirectional buffer.<br>