旋杆和贴标试验：按照《预冲式冲管注射器内包岗位标准操作规程》进行设备操

Rotary rod and labeling test: Operate the equipment in accordance with the "Standard Operating Procedures for Post-Package of Pre-flushing Syringe", and select the maximum, minimum and intermediate values ​​according to the rotation speed factor range of the rotary rod labeling process card. . Before the operation of the equipment, prepare 90 samples for each test parameter (normal products without rotating rod). The samples need to be marked with the position of the rubber plug on the outer cover to check the movement of the rubber plug after the end of the screw.

Spin bar and labeling test: in accordance with the "pre-flush punch syringe in-pack post standard operating procedures" for equipment operation, according to the rotation speed factor range of the screw bar labeling process card, respectively, select the maximum, minimum and intermediate values for the test. Before the operation of the equipment, each test parameter is prepared for 90 samples (normal products without rotary rods), samples need to be marked on the jacket plug position, in order to check the movement of the plug at the end of the rod.

Rotating rod and labeling test: the equipment is operated in accordance with the standard operating procedures for inner package post of pre flushing flushing syringe. According to the rotation speed factor range of rotary rod labeling process card, the maximum value, minimum value and intermediate value are selected for the test. Before the operation of the equipment, 90 samples (normal products without rotating rod) are prepared for each test parameter, and the rubber plug position mark shall be made on the outer sleeve of the sample, so as to check the movement of the rubber plug after the rotary rod is completed.<br>