当机台发生突然性断电时，可能存在反极检测信号中断的现象，极易出现反极品

When the machine sudden power failure occurs, there may be a phenomenon of reverse polarity detection signal interruption, the best anti-prone, and there is a long product at the air outlet temperature is too high to produce a transparent waist / plastic sleeve undesirable phenomenon, it requires when sudden power failure / abnormality stop, the operator must each product on a bare disc clamp profusely, products are all subject to the outlet

When the machine sudden power failure, there may be the phenomenon of anti-polar detection signal interruption, very easy to appear anti-polar products, and the product at the blowtorch has a long-term temperature is too high and produce waist transparent / set of glue bad phenomenon, so the sudden power failure / abnormal shutdown, the operator must take off every naked product on the disc fixture, the outlet product inspection

In case of sudden power failure of the machine, the reverse pole detection signal may be interrupted, and it is easy to produce reverse pole products. In addition, the products at the air blowing port have the phenomenon of high temperature for a long time, resulting in the phenomenon of waist transparency / poor glue coating. Therefore, when the sudden power failure / abnormal shutdown is required, the operator must take off every naked product on the disc clamp, and conduct full inspection on the products at the air outlet