弯曲精度要求是一个需要慎重考虑的因素。正是这个因素决定您是购买一台普通NC折弯机还是CNC折弯机,更或者是油电混合折弯机等等。如果弯曲精度要的英语翻译

弯曲精度要求是一个需要慎重考虑的因素。正是这个因素决定您是购买一台普通

弯曲精度要求是一个需要慎重考虑的因素。正是这个因素决定您是购买一台普通NC折弯机还是CNC折弯机,更或者是油电混合折弯机等等。如果弯曲精度要求为±1°而且不能变,您必须训责CNC数控折弯机。那么,成形必须采用高精度机器以及良好的模具。因为CNC折弯机滑块重复精度为±0.0004英寸。普通折弯机滑块重复精度是±0.002英寸。此外,采用模具进行实际工作时,还会产生±2~3°的偏差。当然,油电混合作为新一代节能型数控折弯机。其精度和稳定性也是极佳的并且更加节能环保。
0/5000
源语言: -
目标语言: -
结果 (英语) 1: [复制]
复制成功!
Bending accuracy is a need to carefully consider factors. It is this factor you decide to buy one common NC bending machine or CNC bending machine, bending machine is more or hybrid, and so on. <br>If the bending accuracy of ± 1 ° and can not be changed, you must reproach of CNC bending machine. Then, high-precision molding machine and must be a good mold. <br>Since the CNC bending machine slider repeat accuracy of ± 0.0004 inches. Ordinary bending machine slide repeatability is ± 0.002 inches. Further, when the actual work using the die, will produce ± 2 ~ 3 ° deviation. Of course, as a new generation of energy-saving type hybrid CNC bending machine. Accuracy and excellent stability and are more environmentally friendly.
正在翻译中..
结果 (英语) 2:[复制]
复制成功!
Bending accuracy requirements are a factor that needs to be carefully considered. It is this factor that determines whether you buy an ordinary NC bending machine or CNC bending machine, or even the oil-electric hybrid bender and so on.<br>If the bending accuracy requirement is 1 degree and cannot be changed, you must discipline the CNC bender. Then, forming must be made with a high-precision machine and a good mold.<br>Because the CNC bender slider repeat accuracy is .0004 inches. The repeat accuracy of the normal bender slider is .002 inches. In addition, the use of mold for practical work, but also will produce a deviation of 2 to 3 degrees. Of course, the oil-electric mix as a new generation of energy-saving CNC bending machine. Its accuracy and stability are also excellent and more energy-efficient and environmentally friendly.
正在翻译中..
结果 (英语) 3:[复制]
复制成功!
The requirement of bending accuracy is a factor to be considered carefully. It is this factor that determines whether you want to buy a common NC bending machine or CNC bending machine, or oil electric hybrid bending machine and so on.<br>If the bending accuracy is required to be ± 1 ° and cannot be changed, you must be responsible for CNC bending machine. Therefore, high-precision machines and good dies must be used for forming.<br>Because the repeatability of CNC bending machine slider is ± 0.0004 inch. The repeat accuracy of common bending machine slider is ± 0.002 inch. In addition, the deviation of ± 2 ~ 3 ° will be produced when the mold is used for actual work. Of course, oil electric hybrid as a new generation of energy-saving CNC bending machine. Its precision and stability are also excellent and more energy-saving and environmental protection.<br>
正在翻译中..
 
其它语言
本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.

Copyright ©2024 I Love Translation. All reserved.

E-mail: