安装过程 电梯井道灯不能变色 控制信号异常 卡尔指导升级程序 未得到解

During the installation process, the elevator shaft light cannot change color. The control signal is abnormal. Carl guides the upgrade program. The light changes from no color to no light. During the <br>installation process, the operation screen displays abnormal program error or abnormality <br>. Scratch "The material of the middle plate is soft, the gap between the middle plate and the platform is small, the width of the L-type middle plate is large, and the shape changes obviously. <br>" "Install the cushion on the platform to temporarily reduce the sound of the <br>middle plate. It is recommended to optimize the design of the middle plate" <br>Installation process platform The safety frame and the side cover are rubbed against the platform installation frame. The deformation of the installation frame to both sides is large, and the gap between the safety frame and the side cover is small. Use cable ties to fix the frame to eliminate the deformation to both sides.

During installation, the elevator hoistway light cannot change color, the control signal is abnormal, the Carl guidance upgrade program has not been solved, and the light changes from no color to no light<br>The operation screen during installation shows abnormal program error or abnormal. The circuit board and control screen have been replaced<br>During installation, the intermediate plate and the platform are scratched. "The intermediate plate is soft, the gap between the intermediate plate and the platform is small, the width of L-type intermediate plate is large, and the shape change is obvious.<br>"" install cushions on the platform to temporarily reduce the sound of scratching<br>It is suggested to optimize the design of intermediate plate“<br>During the installation process, the platform safety frame rubs against the side cover plate. The deformation of the platform installation frame towards both sides is large, and the gap between the platform installation frame and the side cover plate is small. Fix the frame with a tie to eliminate the deformation towards both sides

During the installation process, the elevator shaft lamp can't change color. The control signal is abnormal. The upgrade program instructed by Karl has not been solved, and the lamp changes from no color to no light. The process installation operation screen shows abnormal program error or abnormal replacement circuit board and control screen have been resolved. In the process of installation, the material of the middle plate is soft, the gap between the middle plate and the platform is small, and the width of L-type middle plate is large, and the shape change is obvious. ""Install a cushion on the platform to temporarily reduce the sound when rubbing. It is recommended to optimize the design of the intermediate plate " In the process, the safety frame of the installation platform and the side cover plate rub against the installation frame of the platform. The deformation of the installation frame to both sides is large, and the gap between the installation frame and the side cover plate is small. Fix the frame with tie straps to eliminate the deformation to both sides.