1、现场检查时发现G100+900施工段处于陡坡段，要求施工单位修筑临

1, on-site inspection found G100 + 900 construction segment in the steep section, require the construction unit construction of temporary sidewalk; (see photo) <br>2, site supervision visits found during construction unit construction site of individual workers not wearing safety helmets, supervision has been construction contractor verbal notice immediate rectification, the rectification has been completed. <br>" <br>1, to cover the underlying approach cement requirements; <br>" laying plate (see photo) 1, leakage occurs machinery, repair site supervision in claim <br>2, Downhole lighting apparatus using non-standard patch panel, has requested rectification (see photo). "

1, on-site inspection found that the G100-900 construction section is in a steep section, requiring the construction unit to build temporary side road; (see photo)<br>2, the site supervision inspection process found that the construction unit construction site individual operators did not wear a hard hat, the supervision has verbally informed the construction contractor to immediately rectify, has now completed the rectification. <br>" <br>1, the entry cement requirements under the pad cover;<br>"1, mechanical equipment oil leakage, site supervision requires repair when laying pads (see photo) 2, underground work lighting equipment plug-in board use is not standardized, has been required to carry out rectification (see photo) "

1. During the on-site inspection, it is found that G100 + 900 construction section is in a steep slope section, and the construction company is required to build a temporary side road; (see photo for details)<br>2. During the site supervision and inspection, it was found that some operators of the construction company did not wear safety helmets on the construction site, and the supervisor orally informed the construction contractor to rectify immediately, and the rectification has been completed.<br>"<br>1. The cement required to enter the site shall be padded and covered;<br>"1. In case of oil leakage of mechanical equipment, the on-site Supervisor requires to lay the base plate when repairing (see photo for details)<br>2. The use of underground lighting equipment patch panel is not standardized, and rectification has been required (see photo for details)“<br>