选购下辊中间部位带有辅助支撑滚轮的卷板机以增强下辊的刚性。辅助支撑滚轮

Choose a plate bending machine with auxiliary supporting rollers in the middle of the lower roller to enhance the rigidity of the lower roller. <br>The number of auxiliary support rollers is set according to the length of the equipment. Or both the roller arc correction and the auxiliary support wheel. <br>At present, most famous plate bending machine manufacturers will adopt the method of roller arc correction combined with the lower roller to increase auxiliary support to design and manufacture longer coils. Trigger. <br>However, the correction methods adopted by various manufacturers based on their own experience are slightly different. <br>In this way, when rolling cylinders of different sizes, we appropriately adjust the upward pressure of the auxiliary support wheel, so that the lower roller first has an upward reverse deformation during the rolling process.

The middle part of the lower roller is purchased with a roll machine that supports the roller to enhance the rigidity of the lower roller.<br>The number of auxiliary support rollers is set according to the length of the device. Or the roller arc correction and auxiliary support wheel both.<br>At present, most well-known roll plate manufacturers will take the roll arc correction combined with the lower roller to increase auxiliary support method seispmiller design, manufacture longer roll plate machine.<br>However, the revised approach adopted by each manufacturer according to its own experience is slightly different.<br>In this way, when rolling the cylinder of different sizes, we adjust the pressure of the auxiliary support wheel upward, so that the lower roller in the roll process first has an upward anti-deformation.

Choose the plate bending machine with auxiliary support roller in the middle of the lower roll to enhance the rigidity of the lower roll.<br>The number of auxiliary support rollers is set according to the length of the equipment. Or roller arc correction and auxiliary support wheel both<br>At present, most of the famous plate bending machine manufacturers will adopt the method of roll shaft arc correction combined with adding auxiliary support to the lower roll to design and manufacture long bending machine.<br>However, the correction methods adopted by different manufacturers are slightly different according to their own experience.<br>In this way, when rolling cylinders of different sizes, we can adjust the upward pressure of the auxiliary support wheel properly, so that the lower roller has an upward reverse deformation in the rolling process.