pe保护膜的使用环境及粘接要求是怎么样的？PE保护膜在进行制造的过程中

What is the use environment and bonding requirements of pe protective film? <br>In the manufacturing process of PE protective film, the main starting point is the PET substrate when it is produced. The PET substrate is corona or primer coated, then coated with a coating machine, and then passed through the drying channel, winding and Ripening and cutting, and then get the finished product. <br> <br>In order to maintain the appearance of the PE protective film, there will be no migration of electrostatic materials during use. Its products are non-toxic, odorless and environmentally friendly, so it has a good application effect. Therefore, this kind of maintenance film can be used on packaging materials, interposers and displays in order to obtain the desired effect. <br>The glue used in the production process of PE protective film generally has two kinds of silicone glue and acrylic glue. In terms of selection, it depends on the bonding requirements, and it is up to them to decide. The highly transparent PET maintenance film, which is a kind of PET maintenance film, is on the glue, there are two silicone systems and OCA systems, the difference between them is mainly in curing, the former is for thermal curing, the latter is Fixed-line for UV. <br> <br>The PE protective film will perform well in the center for a period of time, but the two ends of the product will show its phenomenon of lifting. The main reason for this phenomenon is that the maintenance film and the maintained profile are stretched during the process of posting. To a greater extent, in the high-temperature environment, there is unnecessary retraction. <br> <br>PE protective film should be useful to pay attention to the impact of its environmental temperature difference on the use of its products during the production process, to prevent unnecessary appearance stretching during the posting process, when the user installs and completes the profile during the application process In the future, when the maintenance film needs to be torn off from the appearance of the profile.

What is the environment and bonding requirements for the use of pe protective film?<br>PE protective film in the process of manufacturing, in the production is mainly from the beginning of pet substrate, pet substrate through the corona or bottom coating, and then the use of coating machine glue, and then through the baking, roll and cooked cutting, and then get the finished product.<br> <br>PE protective film in the use of the application in order to maintain the appearance of static material migration phenomenon, its products are non-toxic tasteless and environmentally friendly, so, there is a good effect of use. Thus, this maintenance film can be used in packaging materials, panels and displays to achieve the desired results.<br> PE protective film in the process of production of the use of glue, in general, there will be silicone glue and acrylic glue two kinds. And in the choice, mainly to see the bonding requirements, by it to decide. And high-transparent PET maintenance film this kind of PET maintenance film, its glue, is a silicone system and OCA system these two, the difference between them, mainly in curing, the former is for heat curing, the latter is for UV solid.<br> <br>PE protective film in the use of a period of time in the future center performance, but the two ends of the product will present its upturned phenomenon, the main reason for such a phenomenon is the maintenance of the film in and the maintenance of profiles in the posting process, its stretching degree is larger, in the high temperature environment, showing unnecessary retrenchment phenomenon.<br> <br>PE protective film in the process of production should be useful to pay attention to its environmental temperature difference on the use of its products, in the process of posting to prevent unnecessary appearance stretching, in the process of use when the user will be the profile installation and construction in the future, the maintenance film from the appearance of the profile to tear off.

What are the application environment and bonding requirements of PE protective film?<br>In the manufacturing process of PE protective film, the production is mainly started from pet base material. The pet base material is applied through corona or primer, then the coating machine is used for gluing, and then the finished product is obtained through drying, winding and ripening cutting.<br>In order to maintain the appearance of PE protective film without electrostatic material migration, its products are non-toxic, tasteless and environmentally friendly, so it has good application effect. Therefore, this kind of maintenance film can be used in packaging materials, plugboards and displays to achieve the desired effect.<br>PE protective film in the production process used in the glue, generally there will be silicone glue and acrylic glue these two kinds. In terms of selection, it mainly depends on the bonding requirements. It is up to it to decide. The high transparent PET maintenance film, a kind of pet maintenance film, has silica gel system and OCA system on the glue. The difference between them is mainly in curing. The former is for thermal curing, and the latter is for UV fixed phone.<br>The PE protective film will perform well in the future after being used for a period of time, but the two ends of the product will show the phenomenon of warping. The main reason for this phenomenon is that during the process of posting the maintenance film and the maintained profile, the tensile degree is relatively large, and in case of high temperature environment, it presents unnecessary shrinkage.<br>In the production process of PE protective film, it is necessary to pay attention to the impact of environmental temperature difference on the use of its products, prevent unnecessary surface stretching in the process of posting. In the process of application, when the user has finished the installation and construction of profiles, it is necessary to tear the maintenance film off the profile.