简要故事，Dr. michael 发Meko报告给RD/C,CC我，

In a brief story, Dr. michael sent Meko report to RD / C, CC me. RD / C is working in the BBAC 193 floor. According to the normal process, they should lead the investigation and give a reply message. I support, but they are lonely and silent. I analyzed the meko report and thought that some of the problems are manufacturing problems and some are design problems. I can reply to factory manufacturing problems, but the design problems are not my responsibility, so I responded to the picture of the state of the body PT3 glue. During the period, I organized several communication meetings with RD / C. I suggested that they should go to the DT room to confirm and arrange a PT3 pick-up test, but they gave up this opportunity. In the follow-up communication meeting, I insisted on going to the site to confirm again, and then RD / C agreed to the site to confirm. <BR>Today, I and RDC jointly confirmed 5 issues, 3 manufacturing aspects, no non-conformances, 2 design issues, all have corrosion risks, RDC is ready to meet with RDKSO to study and evaluate the risks. <BR>In the follow-up, I will send the on-site problem control MEKO as an SMC report to you

Brief story, Dr. Michael sent Meko report to RD/C, CC me, RD/C on the 193rd floor of BBAC, according to the normal process, they should lead the investigation and give a reply message, I am supportive, but they are lonely and silent. I analyzed the meko report and thought that some problems were manufacturing problems, some design problems, factory manufacturing problems I could reply to, but design problems were not my responsibility, so I replied to the picture of the status of the body PT3 glue. During this time, I organized several communication sessions with RD/C, and I suggested that they should go to the DT room to confirm on site and arrange a 1-volume PT3 test drive, but they gave up the opportunity. In the follow-up communication meeting, I once again insist on joint to the site confirmation, RD/C only agreed to the site confirmation.<BR>Today, I jointly identified five issues with RDC, three manufacturing aspects, no non-conformities, two design issues, all corrosion risks, RDC prepared to meet with RDKSO to study and assess the risk.<BR>Subsequently, I will send you the on-site question against MEKO as a SMC report

Brief story, Dr. Michael sends Meko report to rd / C, CC me, rd / c works on the 193 floor of BBAC, according to the normal process, they should lead the investigation and reply to the information, I support, but they are lonely and silent. I analyzed the Meko report and thought that some of the problems were manufacturing problems and some were design problems. I can reply to the factory manufacturing problems, but the design problems did not belong to my responsibility, so I replied to the pictures of the status of the pT3 glue of the car body. During this period, I organized several communication meetings with rd / C. I suggested that they should go to DT room to confirm on site and arrange one pT3 test run, but they gave up the opportunity. At the follow-up communication meeting, I again insisted on joint confirmation on site, and rd / C agreed to confirm on site.<BR>Today, I jointly confirmed 5 problems with RDC, 3 manufacturing aspects, no non conformance, 2 design issues, all with corrosion risk. RDC is ready to hold a meeting with rdkso to study and assess the risk.<BR>In the future, I will send you the on-site problems against Meko as SMC report<BR>