In the home decoration, we will choose the appropriate indoor door to install according to the function space, where the push and pull door is commonly used - mostly used as kitchen door, balcony door, etc. , even clothes door, cloakroom door will choose push and pull door, but these do not need to be equipped with door locks, and kitchen doors and balcony doors consider the safety of life, usually will be installed door locks.<br><br>Push and pull door lock, simple mechanical structure, stable operation, according to the pursuit of personal quality of life, choose different panel styles, functional settings and electroplating finishes. Generally used with wood moving doors and metal moving doors. Processing process: the lock surface is generally made of zinc alloy die-casting material, the surface must be uniform color, clear pattern, lock body shell is generally made of high-quality steel, solid zinc alloy die-cast cross rotor, solid zinc alloy die-cast hook tongue and so on.<br><br>The installation procedure for pushing and pulling the door lock<br> 1, first put the push and pull door lock on the frame of the door, and then measure the installation position, and then put the screw on and tight, and then check the lock body whether there is a wave instability phenomenon, if there is attention to adjust. A lower door track sliding door lock can also be installed, with the advantage that no holes or cuts are required.<br> 2, clean the bottom of the push and pull door, to ensure that the push and pull smoothly without obstruction. If the track has dust will shadow to the use of door locks, see dirty places in time with rags淸<br> 3, cut a small piece of anti-slip tape placed near the edge of the bone door 緣, when the door is closed it is the rail side channel, can provide more grip, because it has a metal lock, easy to lock the door. The thumb screws of the door lock should be securely secured under the blow.<br> 4, the use of screwdriver screws tightened fixed, locked in the edge of the push and pull door 緣, to prevent being opened, after installation debugging the door lock, to see if there is a smooth or partial card situation, normal words can be directly tightened screws, and then the key inserted, and then with the key to the hook tongue out, after debugging no problem can be used normally
正在翻译中..