6.10.1.12退料管制(含研发退料):退料必须经该机台制程QC签名、盖章确认(退料标签上注明机台线别、退料日期、退料原因、退料人、QC重的英语翻译

6.10.1.12退料管制(含研发退料):退料必须经该机台制程QC签名

6.10.1.12退料管制(含研发退料):退料必须经该机台制程QC签名、盖章确认(退料标签上注明机台线别、退料日期、退料原因、退料人、QC重新签名或盖章等,填写完整、字迹清晰),退料实物与退料单、退料标签相符,裁切标签、退料标签填写规范,退料实物在库存有效期内,否则仓管不接受退料;退料实物若超过库存有效期,或裁切标签脱落,则由IQC负责重检合格后才可退料;材料仓仓管及时归位退料,发料时优先发。包装员必须在裁切余料外箱上贴示“尾数”标签,并用PE膜包装好,仓管优先发放尾数箱。条码管控物料,如未优先尾数(退料)。系统会自动锁住并提示有尾数物料未优先发放。
0/5000
源语言: -
目标语言: -
结果 (英语) 1: [复制]
复制成功!
6.10.1.12 stripper control (including R & D Return Material): Return Material must be approved by the machinery mount process QC, signature and seal on the confirmation (return material tag line do not indicate the machine, return material dates back material reasons people return material , QC re-signed or sealed and so on, complete, clear handwriting), in line with the kind of return material back requisition, return material labels, cut labels, back labels fill material specification, strippers kind in the inventory period, otherwise the warehouse We do not accept the return material; stripper in kind if the inventory period exceeding, or cut the labels off, IQC responsible by qualified after re-examining the retreat materials; materials warehouse warehouse timely homing back material, giving priority to time sends the material. Packers must cut more than expected in the show posted outside the box "mantissa" tab, and good with PE film packaging, warehousing priority payment ending in case. Barcode control material, if not priority mantissa (back material). The system will automatically lock and ending in suggestive material that is not a priority payment.
正在翻译中..
结果 (英语) 2:[复制]
复制成功!
6.10.1.12 Return control (including research and development return): the return of material must be signed by the machine process QC, seal confirmation (discharge label indicates the machine line, the return date, the reason for the return, the return of material, QC re-signature or seal, etc., fill in the complete, clear handwriting), the return of material and return order, return label, cut label, cut label, The discharge label fills in the specification, the discharge material in the inventory validity period, otherwise the warehouse tube does not accept the withdrawal, if the discharge of the material in excess of the inventory validity period, or cut the label off, then IQC is responsible for re-inspection after passing the discharge of material; The packer must put a "tail" label on the cutting and finishing outer box, and wrap it with PE film, and the warehouse tube gives priority to the tailings box. Bar code controls items, such as no priority tail (discharge). The system automatically locks and prompts that a tailings item is not being issued first.
正在翻译中..
结果 (英语) 3:[复制]
复制成功!
6.10.1.12 material return control (including R & D material return): the material return must be confirmed by the signature and seal of the machine manufacturing process QC (the machine line type, material return date, material return reason, material return person, QC re signature or seal, etc. shall be indicated on the material return label, which shall be complete and legible), the material return shall be consistent with the material return sheet and material return label, the cutting label and material return label shall be filled in standard, and the material return shall be in the warehouse. Within the validity period of storage, otherwise the warehouse keeper will not accept the returned materials; if the returned materials exceed the validity period of the inventory, or the cutting label falls off, IQC will be responsible for the re inspection before the returned materials can be returned; the material warehouse keeper will return the materials in time and give priority to the materials when they are issued. The packer must stick the label of "number of tails" on the outer box of the cutting surplus materials and pack them with PE film. The warehouse keeper shall give priority to the distribution of the number of tails. Barcode controls the material, such as the ending number (return) without priority. The system will automatically lock and prompt that the materials with mantissa have not been distributed preferentially.<br>
正在翻译中..
 
其它语言
本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.

Copyright ©2024 I Love Translation. All reserved.

E-mail: