上辊、下辊、侧辊：为卷板机的重要部件，材质为锻制优质碳素钢。机架：分为

Upper roller, lower roller, side roller: It is an important part of the plate rolling machine, and the material is forged high-quality carbon steel. <br>Rack: divided into a high rack and a short rack. The high frame is equipped with upper roller support bearings. The lower frame is equipped with upper roller movable bearings. The two racks are equipped with sliding guides for the lower roller and side roller bearing seats, as well as bevel gears and screw pairs. The rotation of the nut in the bevel gear causes the lower roller and the side roller to rise or fall. <br>Reducer: The main drive reducer and auxiliary drive reducer both use cylindrical gear type reducer. <br>Unloading device: installed on the side of the reducer to balance the upper roller when discharging. <br>Base: welded by section steel and steel plate. Install the frame, reducer, motor, etc. on it to form a whole. <br>Electrical part: All installed in a control box, easy to operate.

Roll, lower roller, side roller: for the rolling machine important components, the material is forged high-quality carbon steel.<br>Rack: One piece each divided into high racks and low racks. The high frame is equipped with roller support bearings. The low frame is equipped with roller-mounted active bearings. The two racks are equipped with lower roller, side roller housing sliding rails, and are equipped with umbrella gears and spiral subs. The lower, side roll rises or falls by rotating the nut in the umbrella gear.<br>Gearer: The main drive gearer and the sub-transmission gearbox are cylindrical gearreduce.<br>Discharge device: Installed on the side of the gearbox for balancing the roller slower when unloading.<br>Base: Welded from steel and steel. Mount the rack, gearbox, motor, etc. on it to form a whole.<br>Electrical part: All installed in one control box for easy operation.

Upper roll, lower roll and side roll: important parts of the rolling machine, made of forged high-quality carbon steel.<br>Rack: it is divided into high rack and low rack. The high rack is equipped with upper roller support bearing. The upper roller movable bearing is installed on the low frame. The two frames are equipped with the sliding guide rails of the lower roll and the side roll bearing seat, and are equipped with the bevel gear and the spiral pair. Rotate the nut in the bevel gear to raise or lower the lower roll and side roll.<br>Reducer: the main drive reducer and the auxiliary drive reducer are cylindrical gear reducer.<br>Unloading device: it is installed on one side of the reducer to balance the upper roller during unloading.<br>Base: welded by section steel and steel plate. The frame, reducer, motor, etc. are all installed on it to form a whole.<br>Electrical part: all installed in a control box, easy to operate.