1. Before pressing, pay attention to check that the antenna installation must be in place, the antenna can not be raised.<br>2. Pressing the workwear process requires 163 - 1 degree C, pressing 5S. There is an emergency pause button on the right side of the work assembly, and if there is an exception, press the emergency button to pause.<br>3. Take care to protect your fingers from burns when pressing, and wear gloves if necessary.<br>4. Hot riveting point after pressing needs to wrap the antenna in the upper shell groove, pressing point below the button edge thorn bar, above hot point must not be higher than the middle thorn bar.
正在翻译中..