减菌过滤：通过过滤的方法将待过滤介质中的微生物污染水平下降到可接受程度

减菌过滤：通过过滤的方法将待过滤介质中的微生物污染水平下降到可接受程度的过滤工艺。完整性测试：与过滤器/过滤装置的细菌截留能力相关的一种非破坏性物理测试。水侵入法测试：是在一定压力下，测量干燥疏水性滤膜对水润湿的抵抗力。即在低于水突破（水被压通过）压力下，测量少量但可测的过滤器结构被挤压而产生的液面下降所形成的“表观”水流量。公司正在使用的过滤器有三种形式：平板式过滤器、筒式过滤器和囊式过滤主要用于各产品药液的除菌过滤、溶液的澄清或减菌过滤；压缩空气的除菌过滤、罐体的呼吸器等。所有直接或间接接触药液的过滤器外壳材质要求为AISI不锈钢316L，供应商应提供过滤器外壳材质证明性文件，要求内壁光滑无划痕，无焊接砂眼及明显毛边。微孔膜过滤器要求壳体和底座以及过滤器和连接管路使用快接方式连接。

0/5000

源语言: -

目标语言: -

结果 (英语) 1: [复制]

复制成功！

Antibacterial filtration: a filtration process that reduces the level of microbial contamination in the medium to be filtered to an acceptable level through filtration. Integrity test: A non-destructive physical test related to the bacteria retention ability of the filter/filter device. Water intrusion test: is to measure the resistance of a dry hydrophobic membrane to water wetting under a certain pressure. That is, under the pressure lower than the water breakthrough (water is pressed through), the "apparent" water flow formed by the drop in the liquid level caused by a small but measurable filter structure being squeezed is measured. The company is using three types of filters: flat-plate filter, cartridge filter and capsule filter are mainly used for the sterilization filtration of the liquid medicine of each product, the clarification of the solution or the sterilization filtration; the sterilization filtration of the compressed air, Tank respirator, etc. The material of the filter housing that directly or indirectly comes into contact with the chemical liquid is required to be AISI stainless steel 316L. The supplier shall provide proof documents for the material of the filter housing, and the inner wall shall be smooth and free of scratches, welding holes and obvious burrs. The microporous membrane filter requires that the shell and the base, as well as the filter and the connecting pipeline, be connected by quick connection.

正在翻译中..

结果 (英语) 2:[复制]

复制成功！

Sterilization: A filtration process that reduces the level of microbial contamination in the medium to be filtered to an acceptable level by filtration. Integrity test: A non-destructive physical test related to the bacterial retention capability of a filter/filter device. Water intrusion test: is under a certain pressure, to measure the dry hydrophobic membrane resistance to moisture. That is, at pressure below the water breakout (water is pressed through), measure the "look" water flow formed by the drop of the liquid surface caused by the extrusion of a small but measurable filter structure. There are three forms of filters that the company is using: flat-panel filters, barrel filters, and cystic filters. Mainly used for sterilization filtration of various product fluids, clarification of solution or sterilization filtration, sterilization filtration of compressed air, respirators of tanks, etc. All direct or indirect contact with the liquid filter housing material requirements for AISI stainless steel 316L, suppliers should provide filter housing material proof documentation, requiring the inner wall smooth and scratch-free, no welded sand eyes and obvious hair edges. Micro-porous membrane filters require the housing and base, as well as filters and connection lines, to be connected by quick connection.

正在翻译中..

结果 (英语) 3:[复制]

复制成功！

Bacteria reduction filtration: a filtration process in which the microbial contamination level in the medium to be filtered is reduced to an acceptable level by filtration. Integrity test: a non-destructive physical test related to the bacterial retention capacity of the filter / filter unit. Water invasion test: it is to measure the resistance of dry hydrophobic filter membrane to water wetting under a certain pressure. That is, under the pressure of water breakthrough (water being pressed through), the "apparent" water flow rate formed by the liquid level drop caused by the extrusion of a small but measurable filter structure is measured. The company is using three types of filters: flat filter, cartridge filter and bag filter It is mainly used for sterilization and filtration of liquid medicine, clarification or reduction of bacteria filtration of solution, sterilization and filtration of compressed air, tank respirator, etc. All filter shell materials that directly or indirectly contact with liquid medicine shall be AISI stainless steel 316L. The supplier shall provide the certification documents of filter shell material, and the inner wall shall be smooth without scratch, welding sand hole and obvious burr. The shell and base of the microporous membrane filter, as well as the filter and connecting pipeline, are required to be connected by quick connection.

正在翻译中..

其它语言

本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.