综上，分析为组立机在装配胶盖过程中，当胶盖迫紧夹（组立机6-12个/台

In summary, the analysis assembly machine during assembling plastic cover, when the cover rubber pressing clip (6-12 assembling machine / folder pressing station) machine debugging in place, the gap is too large, resulting in plastic covered by holes shift shock; sub-pixel misaligned pin set pin holes in the standing plastic cover plastic cover wear, resulting in plastic cover puncture hole, excess debris adhering plastic cover plastic cover pin hole roots, your company presents feedback of failure .

In summary, the analysis for the group set machine in the process of assembling the rubber cap, when the rubber cap tight clip (group set machine 6-12 / station urgent clip) machine commissioning is not in place, the gap is too large, resulting in the rubber cover hole bit was shaken offset;

To sum up, it is analyzed that in the process of assembling the rubber cover of the assembly machine, when the rubber cover pressing clamp (6-12 pressing clamps of the assembly machine) is not in place, the gap is too large, which causes the vibration deviation of the rubber cover hole position; when the pin pin foot assembly passes through the rubber cover hole, it is not aligned with the rubber cover hole, which causes the rubber cover hole to be punctured, and the excess rubber cover debris adheres to the rubber cover hole at the root of the pin, presenting the bad feedback from your company.