待箱梁全部抽出后，再将发电机台板上表面10mm钢板及胶皮撤走，使用吹风

After the box girder is fully drawn out, remove the 10mm steel plate and rubber on the surface of the generator table, use a blower to clean the surface of the table, and the 600t hydraulic lifting device slowly returns to the hook. The two sides of the foundation are designed to place jacks. Arrange the supporting plate for factory support on the buried bottom plate. The upper part of the supporting plate is higher than the top surface of the generator table. After the arrangement is completed, slowly drop the stator onto the supporting plates on the 6 embedded bottom plates. After checking that the supporting plates are normal, Remove the stator sling and mount the lifting device rigging sling to complete the stator positioning.

After all the box beams are drawn out, then remove the surface 10mm steel plate and rubber on the generator bench plate, use a hair dryer to blow the surface of the cleaning table, 600t hydraulic lifting device slowly hook back, designed on both sides of the foundation to place the jack pre-buried bottom On the board to arrange the factory support support plate, the support board is higher than the surface of the generator table, after the arrangement will be slowly dropped to 6 pre-buried substrate support board, check that the support plate is not abnormal, remove the styropod lifting device lifting device lifting plate, Complete the synth in place.

After all the box girders are pulled out, remove the 10mm steel plate and rubber from the upper surface of the generator bedplate, use the blower to clean the upper surface of the bedplate, and the 600t hydraulic lifting device slowly returns the hook. The support plate for factory support is arranged on the embedded bottom plate for placing jacks on both sides of the foundation. The upper part of the support plate is higher than the upper surface of the generator bedplate After the support plate on the bottom plate is buried, check that the support plate is normal, remove the stator lifting hook, mount the lifting device rigging lifting plate, and complete the stator in place.<br>