液压闸式剪板机刀架体后导轨由4个大轴承支撑。前导轨由2只背后有压紧弹簧

液压闸式剪板机刀架体后导轨由4个大轴承支撑。前导轨由2只背后有压紧弹簧的轴承压紧。从而使前后导轨间均无间隙。运动间隙与刃隙相加精度误差均保持在0.04mm以下.因而,剪切材料更加光滑无毛刺。刀架以相对于下刀刃作垂直直线运动以保证剪切板料扭曲变形小。直线度更精确。因为油缸、刀架、刀刃在同一直线且作垂直于下刀刃运动，所以不容易产生变形。

0/5000

源语言: -

目标语言: -

结果 (英语) 1: [复制]

复制成功！

The rear guide rail of the cutter head of the hydraulic brake shear is supported by 4 large bearings. The front rail is compressed by two bearings with compression springs on the back. Thereby, there is no gap between the front and rear rails. Accuracy error of the added motion gap and blade gap is kept below 0.04mm. Therefore, the sheared material is smoother without burrs. The knife holder moves vertically and linearly with respect to the lower blade to ensure that the shearing sheet has less distortion. The straightness is more precise. Because the cylinder, blade holder and blade are in the same straight line and move perpendicular to the lower blade, it is not easy to deform.

正在翻译中..

结果 (英语) 2:[复制]

复制成功！

The rear rail of the hydraulic brake-type shear machine body is supported by 4 large bearings. The front rail is pressed by 2 bearings with compression springs on the back. So that there is no clearance between the front and rear rails. The accuracy error of the combined movement gap and the edge gap is maintained below 0.04mm. The knife holder moves vertically in a straight line relative to the lower cutting edge to ensure that the cutting plate material is distorted and deformed. The straightness is more precise. Because the cylinder, the knife frame, the blade in the same straight line and perpendicular to the cutting edge movement, so it is not easy to produce deformation.

正在翻译中..

结果 (英语) 3:[复制]

复制成功！

The back guide rail of the hydraulic gate shearing machine is supported by 4 big bearings. The front guide rail is compressed by two bearings with compression spring at the back. So that there is no gap between the front and rear guide rails. The error of adding accuracy between the movement gap and the edge gap is kept below 0.04mm, so the shearing material is more smooth and burr free. The tool holder moves in a vertical straight line relative to the lower blade to ensure that the shear plate has little distortion. Straightness is more accurate. Because the oil cylinder, tool holder and blade are in the same straight line and move perpendicular to the lower blade, it is not easy to produce deformation.

正在翻译中..

其它语言

本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.