非常感谢审稿人的意见。本文对OLTC触头类故障在实验室内进行设置,并对不同故障的振动信号进行采集后进行分析,并不是立即给出诊断结果,因此属于的英语翻译

非常感谢审稿人的意见。本文对OLTC触头类故障在实验室内进行设置,并对

非常感谢审稿人的意见。本文对OLTC触头类故障在实验室内进行设置,并对不同故障的振动信号进行采集后进行分析,并不是立即给出诊断结果,因此属于离线监测。在线监测是下一步的计划,通过实时观测OLTC的振动状况进行特征提取与典型的信号特征进行对比,并立即出诊断结果。整个诊断过程采样在100ms到120ms左右,包含了M型的OLTC触头切换的整个动作过程。
0/5000
源语言: -
目标语言: -
结果 (英语) 1: [复制]
复制成功!
Thank you very much for the comments of the reviewers. This article sets up the OLTC contact faults in the laboratory, and collects and analyzes the vibration signals of different faults. It does not give the diagnosis results immediately, so it belongs to offline monitoring. Online monitoring is the next step. Through real-time observation of OLTC vibration conditions, feature extraction is compared with typical signal features, and the diagnosis result is immediately output. The entire diagnosis process is sampled in about 100ms to 120ms, including the entire action process of M-type OLTC contact switching.
正在翻译中..
结果 (英语) 2:[复制]
复制成功!
Thank you very much for the comments of the reviewers. In this paper, OLTC contact failure is set up in the laboratory, and the vibration signal of different faults is collected and analyzed, not immediately give the diagnostic results, so it belongs to offline monitoring. Online monitoring is the next step, by observing the vibration of OLTC in real time, feature extraction is compared with typical signal characteristics, and the diagnosis results are immediately produced. The entire diagnostic process is sampled from around 100ms to 120ms and includes the entire motion of the M-type OLTC contact switching.
正在翻译中..
结果 (英语) 3:[复制]
复制成功!
Thank you very much for your comments. In this paper, the OLTC contact fault is set in the laboratory, and the vibration signals of different faults are collected and analyzed. The diagnosis results are not given immediately, so it belongs to offline monitoring. Online monitoring is the next step of the plan, through the real-time observation of the OLTC vibration conditions for feature extraction, and typical signal features for comparison, and immediately out of the diagnosis results. The whole diagnosis process is sampled from 100ms to 120ms, including the whole operation process of M-type OLTC contact switching.
正在翻译中..
 
其它语言
本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.

Copyright ©2024 I Love Translation. All reserved.

E-mail: