4.2 控制卡安装 安装步骤 :请小心拿放,在接触控制卡电路或插/拔控制卡之前触摸有效接地金属物体,防止可能的静电损坏运动控制卡,并请佩戴防的英语翻译

4.2 控制卡安装 安装步骤 :请小心拿放,在接触控制卡电路或插/拔控

4.2 控制卡安装 安装步骤 :请小心拿放,在接触控制卡电路或插/拔控制卡之前触摸有效接地金属物体,防止可能的静电损坏运动控制卡,并请佩戴防静电手套。 (1)关闭计算机,将控制卡插入 PCI 槽,并固定好控制卡以及扩展排线的挡片 螺丝; (2)启动计算机后,会自动跳出“更新驱动程序软件”,点击“取消”按钮, 如下图所示。如果未出现此对话框,表示卡没有插好,请重复第一步动作。(3)安装 TubePro 软件,在安装 TubePro 软件的同时,会自动安装好 BMC1805 卡驱动和加密狗的驱动。 (4)安装期间请关闭杀毒软件之类,防止误杀导致安装失败。安装过程中弹出 任何阻止信息的一律允许通过! (4)打开设备管理器,以确认安装成功。如出现以下图标:
0/5000
源语言: -
目标语言: -
结果 (英语) 1: [复制]
复制成功!
4.2 installation of the card <br>installation procedure: <br>Please place carefully, touch effectively grounded metal object prior to contacting the control circuit or card insertion / pull control card, to prevent possible electrostatic damage motion control card and Wear an antistatic gloves. <br>(1) Turn off the computer, the control card is inserted into PCI slots, and fixed control card and an extended flap cable of <br>screws; <br>(2) start the computer will automatically jump "Update driver software", "Cancel" button, <br>As shown below. <br>If this dialog box does not appear, it means that the card is not inserted properly. Please repeat the first step. <br>(3) Install the TubePro software. While installing the TubePro software, the BMC1805 card driver and the dongle driver will be installed automatically. <br>(4) Please turn off anti-virus software and the like during installation to prevent the installation failure due to accidental killing. Pop up during installation <br>of any of the information shall be allowed to stop by! <br>(4) Open the device manager to confirm the successful installation. If the following icon appears:
正在翻译中..
结果 (英语) 2:[复制]
复制成功!
4.2 Control card installation <br>Installation steps:<br>Take care and touch a valid grounded metal object before touching the control card circuit or plugging/unplugging the control card to prevent possible static damage to the motion control card, and wear anti-static gloves. <br>(1) Turn off the computer, insert the control card into the PCI slot, and secure the control card and the partof extending the wiring <br>Screws; <br>(2) After starting the computer, you will automatically jump out of the "Update driver software" and click the "Cancel" button. <br>As shown in the following image.<br>If this dialog box does not appear, the card is not plugged in, repeat the first action.<br>(3) Install the TubePro software, install the TubePro software at the same time, will automatically install the BMC1805 card driver and dongle drive. <br>(4) During the installation, please turn off anti-virus software and so on, to prevent manslaughter leading to installation failure. Ejection during installation <br>Any blocking information is allowed through! <br>(4) Open Device Manager to confirm that the installation was successful. If the following icon appears:
正在翻译中..
结果 (英语) 3:[复制]
复制成功!
4.2 control card installation<br>Installation steps:<br>Please handle with care, touch effectively grounded metal objects before touching the control card circuit or inserting / pulling out the control card, so as to prevent possible electrostatic damage to the motion control card, and wear anti-static gloves.<br>(1) Turn off the computer, insert the control card into the PCI slot, and fix the control card and the blank of the expansion cable<br>Screw;<br>(2) After starting the computer, it will automatically jump out of "update driver software", and click "Cancel" button,<br>As shown in the figure below.<br>If this dialog box does not appear, it means that the card is not inserted properly. Please repeat the first step.<br>(3) When tubepro software is installed, the driver of bmc1805 card and the driver of encryption dog will be installed automatically.<br>(4) During the installation, please close the antivirus software to prevent the installation failure. Pop up during installation<br>Any blocking information is allowed to pass!<br>(4) Open device manager to confirm that the installation was successful. If the following icon appears:
正在翻译中..
 
其它语言
本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.

Copyright ©2024 I Love Translation. All reserved.

E-mail: