巴基斯坦贾姆肖罗2×660MW超超临界燃煤电站工程1#机组主厂房内安装

A steam turbine produced by SIMENS is installed in the main building of Unit 1 of the Jamshoro 2×660MW ultra-supercritical coal-fired power plant project in Pakistan. Some high-pressure cylinders and medium-pressure cylinders of the steam turbine are all supplied as a whole. No other internal assembly work is required on site, just hoist them into place as a whole. The high-pressure cylinder and the intermediate-pressure cylinder are arranged longitudinally on the 15.5 m main operating level platform in the turbine room. The longitudinal center is 14.5m from the axis of row A, the horizontal centerline of the high-pressure cylinder is 5.393m from the 3-axis, and the horizontal centerline of the high-pressure cylinder is 11.163m from the 3-axis. The weight of the high-pressure cylinder is 128t, and the weight of the medium-pressure cylinder is 180t. A 630t crawler crane (84m main boom, 15m over-lift radius) will be used to directly hoist the medium-pressure cylinder and high-pressure cylinder in place.

Jamshoro, Pakistan 2×660MW ultra-supercritical coal-fired power plant project 1 - unit main plant installed by SIMENS production turbine. Turbine part of the high-pressure cylinder and medium-pressure cylinder are a one-way supply, the site does not need to carry out other internal assembly work, directly the overall lifting can be in place. The high-pressure cylinder and the medium-pressure cylinder are arranged vertically on the 15.5 m main operating layer platform between the steam engines. Its vertical center is 14.5m from the A-wall axis, the horizontal center line of the high-pressure cylinder is 5.393m, and the horizontal center of the high-pressure cylinder is 11.163m. High-pressure cylinder weight 128t, medium cylinder weight 180t, the site is to use 630t track crane (84m main arm, 15m over-lifting radius) direct lifting in place medium pressure cylinder and high-pressure cylinder.

Steam turbines produced by Siemens company are installed in the main power house of unit 1 of jamshoro 2 × 660MW ultra supercritical coal fired power plant project in Pakistan. The HP cylinder and IP cylinder of steam turbine are supplied in an integral way, so there is no need to carry out other internal assembly work on site, so it can be directly hoisted in place as a whole. The HP cylinder and IP cylinder are longitudinally arranged on the platform of 15.5m main operation floor in the turbine room. Its longitudinal center is 14.5m away from the axis of row a wall, the transverse center line of high pressure cylinder is 5.393m away from axis 3, and the transverse center line of high pressure cylinder is 11.163m away from axis 3. The weight of HP cylinder is 128t, and that of IP cylinder is 180t. It is planned to use 630t crawler crane (84m main boom, 15m super lift radius) to lift IP cylinder and HP cylinder in place.<br>