3.9.3.1.2减速机拆下放到平台上，拆下减速机输出轴端盖，拆下输入

3.9.3.1.2 Remove the reducer and place it on the platform, remove the output shaft end cover of the reducer, and remove the input shaft seal <br>3.9.3.1.3 Remove the needle gear shell bolts of the reducer. <br>Use a flat spatula to shave the needle gear shell and the base of the reducer, and mark the joint surface. <br>3.9.3.1.4 Remove the eccentric bearing snap ring

3.9.3.1.2 remove the reducer and put it on the platform, remove the output shaft end cover of the reducer and the input shaft seal<br>3.9.3.1.3 remove the bolts of reducer needle gear housing.<br>Shave the needle gear housing and the reducer base with a flat shovel, and mark the joint surface.<br>3.9.3.1.4 remove the eccentric bearing snap ring

3.9.3.1.2 Remove the reducer and put it on the platform, remove the end cover of the output shaft of the reducer and the shaft seal of the input shaft. 3.9.3.1.3 Remove the reducer needle tooth shell bolt. Use a flat shovel to shave the needle tooth shell and reducer base, and mark the joint surface. 3.9.3.1.4 Remove the eccentric bearing snap ring.