1.所有銅杯士應裝配在車底架兩側最寬位置上,而不是往中間收縮, 好處是

1. All copper cups should be assembled on the widest positions on both sides of the vehicle underframe, instead of shrinking toward the middle. The <br>advantage is that the cups at both ends can limit the wheel set with the widest size to ensure that the wheel set can drive more smoothly. <br><br>2. Can the middle cup be changed to be consistent with other cups, so that the left and right power wheels are restricted to avoid excessive swings of the power wheels. <br>And the original design is close to the gear teeth, and there is no movement.

1. all 銅 cups of taxis are placed in the 側 position 寬 the undercover frame, rather than in the middle 縮,<br> The good thing is to make the end cup 寬 the most appropriate size limit, to ensure that the 穩 more smooth.<br><br>2. Can the middle cup be changed to be consistent with other cupcakes, so that the force is limited to the left and right, to avoid the force 擺 too large.<br> And the original system is 齒 close, no 竄.

1. All copper cups should be installed at the widest position on both sides of the underframe instead of shrinking to the middle,<br>The advantage is that both ends of the cup with the widest size limit wheel set, to ensure that the wheel set can be more stable driving<br>2. Can the middle cup be changed to be the same as other cups, so that the power wheel set is limited to the left and right to avoid excessive swing of the power wheel set<br>And the original design is close to the gear teeth, without movement<br>