解决卷板机发热故障的正确方案：1、在启动机器之前，请检查电源系统。检查

Bending failure to solve the heat right solution: <br>1, before starting the machine, check the power system. Check whether the operating system security mechanically reliable. Add oil as required. <br>2, after power is turned, the rotational direction of the large gear inspection. It is consistent with the direction indicated by the arrow. Normal acknowledgment after the opening of the foot switch. <br>3, maintenance and repair machines can only be carried out during the stop. In operation, any part of the body do not extend into the rotating parts of the enclosed area. <br>4, the operation is completed, turn the power off, the cleaning machine, and into the amount of lubricating oil. <br>5, found after equipment failure, should be shut down and call for service.

The correct solution to the heating fault of the roller machine:<br>1. Check the power system before starting the machine. Check that the operation of the mechanical system is secure. Add lubricant as required.<br>2. After turning on the power supply, check the direction of the main gear rotation. It is consistent with the direction indicated by the arrow. Make sure it's OK before you turn on the operating foot switch.<br>3. Maintenance and repair of the machine can only be carried out during the stop. When operating, do not extend any part of the human body into the enclosed area of the rotating area.<br>4, after the operation is completed, cut off electricity, clean the machine, and inject the appropriate amount of smooth oil.<br>5, found that the equipment is faulty, should be timely stop and contact maintenance personnel.

The correct solution to the heating failure of the rolling machine:<br>1. Before starting the machine, please check the power system. Check whether the operation of mechanical system is safe and reliable. Add lubricating oil as required.<br>2. After connecting the power supply, check the rotation direction of the big gear. Whether it is consistent with the direction indicated by the arrow. Turn on the operating foot switch after confirming that it is normal.<br>3. Maintenance and repair of the machine can only be carried out during shutdown. During operation, do not extend any part of the human body into the closed area of the rotating part.<br>4. After the operation, cut off the power supply, clean the machine tool, and inject proper amount of smooth oil.<br>5. In case of any equipment failure, shut down the machine in time and contact the maintenance personnel.<br>