工装温度达到163℃后，将工装底座拉出，放上上壳与天线组件(注意方向)

After the tooling temperature reaches 163℃, pull out the tooling base, put the upper shell and antenna assembly (note the direction), as shown in Figure 2. After placing it, push the tooling to the end. After confirming that the placement is OK, press the green button on the front of the tooling with both hands (Figure 2 Both sides of the tooling instrument), the tooling pressing head is automatically pressed down as shown in Figure 3. At this time, the tooling display instrument displays after 5S (pressing 5S), the tooling will automatically lift the pressing head, as shown in Figure 4, pull out the tooling base and take it out. Shell, confirm the pressing effect, as shown in Figure 5.

After the workwear temperature reaches 163 degrees C, pull out the work assembly base, put on the upper shell and antenna assembly (note the direction), Figure 2, put it in place and push it into the workwear to the end, confirm that after placing OK, press the green button in front of the work assembly with both hands (Figure 2 workwear meter) On both sides), the workwear press iron head automatically pressed down as shown in Figure 3, at this time the workwear display instrument shows 5S after (pressing 5S) after the workwear automatically lifted the hot head, as shown in Figure 4, pull out the workwear base to remove the upper shell, confirm the ironing effect, figure 5.

After the tooling temperature reaches 163 ℃, pull out the tooling base, put the upper shell and antenna assembly (pay attention to the direction), as shown in Fig. 2. After placing, push the tooling to the bottom, press the green button in front of the tooling with both hands (both sides of the tooling instrument in Fig. 2), and the tooling pressing head will automatically press down as shown in Fig. 3. At this time, after 5S (pressing 5S) of the tooling display instrument, the tooling will automatically lift the pressing head, as shown in Fig 4. Pull out the tooling base, take out the upper shell, and confirm the pressing effect, as shown in Fig. 5.<br>