如果不采取有效的措施，则折弯上模全长方向上的凹模进入量不一致会使工件出

If you do not take effective measures, the bending mold die on the full-length direction of an inconsistent amount of work will appear negative phenomena. So, we want to stress and deformation and displacement of the slider is analyzed using the finite simulation methods. Extraction and crowning curve formed and corrected using a drive motor or manual adjustment to achieve full or partial deflection compensation. This can improve the accuracy of the bending machine in a straight line.

If effective measures are not taken, the inconsistent amount of die entry in the full-length direction of the bend will cause the workpiece to appear undesirable. Therefore, we should use the limited simulation method to analyze the force and deformation displacement of the slider. Extract and correct curves that form deflection compensation and use a drive motor or manual adjustment to achieve deflection compensation at full length or local level. This improves the linear accuracy of the bender.

If the effective measures are not taken, the workpiece will be defective if the intakes of the dies in the whole length direction of the bending upper die are inconsistent. Therefore, we need to use the finite simulation method to analyze the stress and deformation displacement of the slider. The curve forming deflection compensation is extracted and corrected, and the deflection compensation is realized in the whole length or part by using the driving motor or manual adjustment. In this way, the straight-line accuracy of the bending machine can be improved.<br>