举例如下：(a)某焊接弯板链节距为66.27mm，测得的最小侧弯Arc

举例如下：(a)某焊接弯板链节距为66.27mm，测得的最小侧弯Arc1=114.3mm，大于101.6mm，满足表1要求，那么另一侧的最小侧弯不能小于114.3mm，最大侧弯不能超出：114.3*1.5=171.45mm。(b)某工程链节距为66.27mm，测得的最小扭曲Twist1=9.52mm，大于3.18mm，满足表2要求，那么另一侧的最小扭曲不能小于9.52mm，最大扭曲不能超出：9.52*1.5=14.28mm。

0/5000

源语言: -

目标语言: -

结果 (英语) 1: [复制]

复制成功！

Examples are as follows: (a) The pitch of a welded bending plate chain is 66.27mm, the measured minimum side bending Arc1 = 114.3mm, which is greater than 101.6mm, and meets the requirements of Table 1, then the minimum side bending on the other side cannot be less than 114.3mm, The maximum side bend cannot exceed: 114.3 * 1.5 = 171.45mm. <br>(b) The pitch of a certain engineering chain is 66.27mm, and the measured minimum twist Twist1 = 9.52mm, which is greater than 3.18mm, meets the requirements of Table 2, then the minimum twist on the other side cannot be less than 9.52mm, and the maximum twist cannot exceed: 9.52 * 1.5 = 14.28mm.

正在翻译中..

结果 (英语) 2:[复制]

复制成功！

Examples are as follows: (a) a welding bend chain pitch of 66.27mm, measured minimum side bend Arc1 s 114.3mm, greater than 101.6mm, to meet the requirements of Table 1, then the other side of the minimum side bend can not be less than 114.3mm, the maximum side bend can not exceed: 114.3 x 1.5 x 171.45mm.<br>(b) A project chain pitch of 66.27mm, measured minimum twist Twist1 , 9.52mm, greater than 3.18mm, to meet the requirements of Table 2, then the other side of the minimum distortion can not be less than 9.52mm, the maximum distortion can not exceed: 9.52 x 1.5 x 14.28mm.

正在翻译中..

结果 (英语) 3:[复制]

复制成功！

For example: (a) the pitch of a welded bent plate chain is 66.27mm, and the measured minimum side bending ARC1 = 114.3mm, greater than 101.6mm, which meets the requirements of Table 1. Then the minimum side bending on the other side shall not be less than 114.3mm, and the maximum side bending shall not exceed 114.3 * 1.5 = 171.45mm.<br>(b) The chain pitch of a project is 66.27mm, and the measured minimum twist T1 = 9.52mm, which is greater than 3.18mm, meeting the requirements of Table 2. Then the minimum twist on the other side shall not be less than 9.52mm, and the maximum twist shall not exceed 9.52 * 1.5 = 14.28mm.

正在翻译中..

其它语言

本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.