其原因有两种可能性，一是维护膜产品所用敏胶不是维护膜专用敏胶，如果是这

There are two reasons for this. First, the sensitive adhesive used in the maintenance film product is not a special adhesive for the maintenance film. If this is the case, the maintenance film will of course work very well at the time of posting, but it will be very difficult to peel off, which is also Some of the most common problems with maintenance membranes produced by manufacturers of illegal maintenance membrane products. <br> <br>3. The PE maintenance film will be outstanding in the center for a period of time, but the wings are raised. The main reason for this phenomenon is that the maintenance film is stretched to a greater extent during the posting process with the maintained profile. In case of high temperature environment, it shows unnecessary shrinkage. <br> <br>4. The most reflected by PE users is the problem of degumming of the protective film products. This problem is most reflected in the profile protection film. When the user tears the protective film off the profile surface after the profile installation is completed, the protective film shows the viscose It does not follow the protective film, but remains on the profile product, which is the last thing users want to see. <br> <br>5. Although PE protective film products can be effectively peeled off, there are protective film expressions on the surface of the profile. This problem often occurs on some low-level protective film products. This is because the protective film is combined with the protected profile. At that time, there is a kind of chemical interaction that occurs in a suitable environment such as sunlight and moisture.

There are two possibilities for this reason, one is that the maintenance film products used in the allergen is not the maintenance film-specific allergenic glue, if so, the maintenance film in the posting of the time of course is very good, but in the peeling will be very difficult, which is also some illegal maintenance film products manufacturers produced maintenance film most commonly presented problems.<br> <br>3, PE maintenance film in the use of a period of time in the future center reflects outstanding, but the two wings, the primary reason for this phenomenon is that the maintenance film in the process of posting with the maintenance profile, its stretching degree is greater, in the future, in the hot environment, showing unnecessary retraction phenomenon.<br> <br>4, PE users reflect the most is the protection film product de-glue problem, this problem in the profile protection film reflects the most, when the user will be the profile installation and construction after the protective film from the surface of the profile to tear off, the protective film performance of the adhesive is not with the protective film, but left on the profile products, this is the user's last desire to see.<br> <br>5, PE protective film products can effectively peel but in the profile surface residual protective film performance words, this problem in some low-grade protective film products often appear, because the protective film in combination with the protected profile, when there is a suitable environment such as sunlight moisture, and occurred a chemical cooperation.

There are two reasons. One is that the sensitive adhesive used for maintenance membrane products is not the special sensitive adhesive for maintenance membrane. If so, the maintenance membrane will play a very good role when it is posted, but it will be very difficult when it is peeled off. This is also the most common problem of the maintenance membrane produced by some illegal manufacturers of maintenance membrane products.<br>3. The PE maintenance film will be outstanding in the future after being used for a period of time. However, the main reason for this phenomenon is that the stretching degree of the maintenance film is relatively large during the posting process with the maintained profile. In the future, in case of high temperature environment, it will show unnecessary retraction phenomenon.<br>4. PE users mostly reflect the degumming problem of the protective film products, which is most reflected in the profile protective film. When users tear the protective film off the profile surface after the installation and construction of the profile, the adhesive of the protective film does not follow the protective film, but remains on the profile products, which is the last thing users want to see.<br>5. Although PE protective film products can be effectively peeled off, there are still words of protective film on the surface of profile. This problem often occurs on some low-level protective film products. This is because when the protective film is combined with the protected profile, it meets the suitable environment such as sunlight and water content, which is a combination effect.