1. 电批扭力为：1.0~1.5kgf.cm，生产前必须对电批扭力进行

1. The torque of the electric screwdriver is: 1.0~1.5kgf.cm, and the electric screwdriver must be calibrated before production. <br>2. When locking, you need to pinch the tail of the machine so that the screws can be locked to avoid abnormal locking. <br>3. After the lock is attached, check whether there is any abnormality in the appearance of the machine, whether the lock is attached to slip teeth, scratches on the shell material, etc.

1. Electric batch torque is: 1.0 to 1.5kgf.cm, before production must be calibrated.<br>2. When locking, pinch the tail of the machine so that the screws are attached to avoid abnormal attachment.<br>3. Check the appearance of the machine after the lock is abnormal, the lock is attached with no slip teeth, scratched shell material, etc.

1. The torque of the electric wrench is 1.0 ~ 1.5 kgf.cm The torque of the electric batch must be calibrated before production.<br>2. When locking, it is necessary to pinch the tail of the machine so that the screw can be locked to avoid abnormal locking.<br>3. After the lock is attached, check whether the appearance of the machine is abnormal, and whether the lock is attached with sliding teeth or scratched shell material.<br>