6.每月检查、及保养(1)检查各驱动气缸是否有漏气(2)减产各固定螺栓

6. Monthly inspection and maintenance <br>(1) Check whether there is air leakage in each drive cylinder <br>(2) Whether the fixing bolts and nuts of the production reduction are loose <br>(3) Check whether there is any abnormality when opening and closing the mold <br>(4) Whether there is cooling circulating water leakage, as well as good and bad water quality <br>(5) checking the operation status of the robot <br>(6) of each hydraulic shock absorber is working properly <br>(7) washing the muffler in each group <br>(8) remove dust lamp, the reflecting plate <br>(9) cleaning Dust in the electric control box (remember to operate when the power is off), such as checking the belt tightness of the air compressor, is called the feeder motor gearbox lubricant. <br>7. Check and maintenance every quarter ①check <br>the pipelines and compressor <br>②check the filter element <br>③ Replace the circulating cooling water <br>④Check whether the anchor screws are loose <br>⑤Check the safety valve action, adjust the pressure above the specified upper pressure to determine whether it is effective.

6. Monthly inspection and maintenance.<br>(1) Check each drive cylinder for air leakage.<br>(2) Reduce the reduction of each fixed bolt nut whether there is loose.<br>(3) Check for abnormalities when opening and closing the mold.<br>(4) Whether the cooling circulating water is leaking, as well as the good and poor water quality.<br>(5) Check the operation of the robot.<br>(6) Whether the oil pressure buffer is working properly.<br>(7) Clean each group of mufflers.<br>(8) Remove dust from the lamp and reflector.<br>(9) Cleaning the electric control box dust (remember to operate when power is off) such as checking the belt tightness of the air compressor called the feeder motor transmission lubricant. <br>7. Check and maintain on a quarterly basis. <br>(1) Check the lines and compressors.<br>(2) Check the filter filter.<br>(3) Replace the circulating cooling water.<br>(4) Check that the screws on the foot are loose.<br>(5) Check the action of the relief valve and adjust the pressure above the specified upper pressure to determine whether it is effective.

6. Monthly inspection and maintenance<br>(1) Check whether there is air leakage in each driving cylinder<br>(2) Whether the fixed bolts and nuts of the production reduction are loose<br>(3) Check whether there is any abnormality when opening and closing the mold<br>(4) Whether there is leakage of cooling circulating water, and whether the water quality is good or bad<br>(5) Check the operation of the manipulator<br>(6) Whether the oil buffer works normally<br>(7) Clean each group of mufflers<br>(8) Remove dust from lamp tube and reflector<br>(9) Clean the dust of the electric control box (remember to operate when the power is off). If the belt tightness of the air compressor is checked, it is called the lubricating oil of the motor gearbox of the feeder<br>7. Quarterly inspection and maintenance<br>① Check all pipelines and compressors<br>② Check the filter element<br>③ Replacement of circulating cooling water<br>④ Check whether the anchor screw is loose<br>⑤ Check the action of the safety valve and adjust the pressure above the specified pressure to determine whether it is effective.