卷板机必须有专人负责管理。卷板机操作人员必须了解机器的结构性能和使用方

The rolling machine must be managed by a dedicated person. <br>The operator of the rolling machine must understand the structure and performance of the machine and how to use it. <br>Workers can only operate after the approval of the responsible manager. <br>Before starting up, please carefully check whether the safety device is in good condition. <br>During operation, it is strictly forbidden to put hands and feet on the rollers, transmission parts and workpieces. <br>When work is interrupted, please turn the clutch to neutral. <br>Multi-person collaborative operations must be directed by a dedicated person. <br>Overwork is strictly prohibited. <br>The tilting reset of the lifting and turning bearing of the upper roller and the balancing of the upper roller must be carried out after the main drive is stopped. <br>It is forbidden to pile up workpieces and debris in the workplace. <br>Keep the machine tool and site clean at all times. <br>After finishing the work, cut off the power and lock the power box.

The reel machine must be managed by a dedicated person.<br>The reel operator must understand the structural properties of the machine and how to use it.<br>The worker may only operate with the consent of the responsible management.<br>Before turning on, carefully check that the safety device is in good health.<br>When operating, do not place hands and feet on rollers and drive components and work parts.<br>When the work is interrupted, hit the clutch into neutral.<br>Multi-person collaborative operations must be under the command of a person.<br>Overloading is strictly prohibited.<br>The dumping reset of the lifting and flipping bearings of the upper roller and the balance of the upper roller shall be carried out after the main drive is stopped.<br>The work place is prohibited from littering work and debris.<br>Keep the machine and the site clean at all times.<br>After the job is complete, cut off the power supply and lock the power box.

The bending machine must be managed by a specially assigned person.<br>The operator of plate bending machine must know the structure, performance and usage of the machine.<br>Only with the approval of the management personnel in charge can the workers carry out the operation.<br>Please check whether the safety device is in good condition before starting the machine.<br>During operation, it is strictly forbidden to put hands and feet on rollers, transmission parts and workpieces.<br>When the work is interrupted, turn the clutch to neutral.<br>There must be a special person to direct the multi person cooperative operation.<br>Overload work is strictly prohibited.<br>The lifting and overturning bearing of the upper roll, the toppling reset of the upper roll and the balance of the upper roll must be carried out after the main drive is shut down.<br>It is forbidden to stack workpieces and sundries in the workplace.<br>Keep the machine tool and site clean at all times.<br>After operation, the power supply shall be cut off and the power box shall be locked.