八、维护、保养与维修 ㈠维护与保养1．连续工作的条件下，对振动电机、风

8. Maintenance, maintenance and repair <br>( <br>1 ) Maintenance and maintenance 1. Under continuous working conditions, the vibration motor, the fan motor, the hoist motor, the shelling and removing machine motor, and the fan motor should be under repaired once every two months, and overhauled once a year. Under the condition of intermittent work, the interval between minor repairs and major repairs can be controlled by oneself. <br>2. Regularly clean the dust, dirt and other impurities inside the fan and gas delivery pipe, and prevent rust. <br>3. Add lubricating oil to each oil cup and nozzle once per shift. <br>4. After each production season is used up, it is necessary to add lubricating oil or grease to each rotating part. <br>5. When not in use, place the machine in a place where it is protected from wind, rain and sunlight, and use a screw to prop up the tires from the ground. <br>6. The tire inflation should be moderate, and the inflation of the two tires should be consistent.

Eight, maintenance, maintenance and repair<br> (i) Maintenance and maintenance<br>1． Under the condition of continuous work, the vibration motor, fan motor, lifter motor, shell removal machine motor, closed air motor should be repaired every two months, once a year. Under the condition of intermittent work, the interval between minor repairs and overhauls is self-control.<br>2． Regularly clean up dust, dirt and other impurities inside fan and gas pipes and prevent rust.<br>3． Each shift to each oil cup, nozzle oil once.<br>4． After each production season has been used up, grease or grease is filled with each rotating area.<br>5． When not in use, the machine should be placed in the wind, rain, sun protection, and use the screw to support the tire off the ground.<br>6． The tire should be moderately inflated and the two tires should be inflated consistently.

8、 Maintenance and repair<br>I. maintenance<br>1. Under the condition of continuous operation, the vibration motor, fan motor, hoist motor, shelling and awning machine motor and air shutter motor should be repaired once every two months and once a year. Under the condition of intermittent work, the interval between minor repair and major repair should be controlled by oneself.<br>2. Regularly clean the dust, dirt and other impurities inside the fan and gas delivery pipe, and prevent rust.<br>3. Add lubricating oil to each oil cup and nozzle once per shift.<br>4. After each production season is used up, it is necessary to add lubricating oil or grease to each rotating part.<br>5. When not in use, the machine should be placed in a windproof, rainproof and sun proof place, and the tire should be supported off the ground with a lead screw.<br>6. The tire inflation should be moderate, and the inflation of the two tires should be consistent.<br>