土建的不均匀沉降要求为 L/1000，L为相邻支撑点的距离。我们现在设

The requirement for uneven settlement of civil works is L/1000, where L is the distance between adjacent support points. <br><br>We now use an expansion joint in our design. The radial direction of the expansion joint can be changed to 7mm. If the deformation during transportation is within this range, our design requirements will be met. <br><br>Checking this part of the work should be the responsibility of the project manager to confirm whether the purchased flatbed truck meets the requirements.

The differential settlement requirement of civil engineering is L / 1000, and l is the distance between adjacent support points.<br>In the design of the expansion joint, if the radial deformation of the expansion joint is within 7mm, it will meet the requirements of our design.<br>The project manager should be responsible for checking this part to confirm whether the purchased flat car meets the requirements.

The uneven settlement requirement of civil engineering is L/1000, and L is the distance between adjacent support points. At present, we have adopted the expansion joint in our design, and the radial direction of the expansion joint can be changed to 7 mm. If the deformation during transportation is within this range, it will meet our design requirements. Check this part of the work should be the responsibility of the project manager to confirm whether the purchased flatbed meets this requirement.