1.前期清洁在动工之前，先把地板扫干净，不要有杂物。然后取出地板膜，展

1. Pre-cleaning <br>Before starting work, first sweep the floor clean, without debris. Then remove the floor film, unfold it, and tear the thick film behind. The side with glue on it is attached to the tile. Then smooth it with your hands, taking care not to lift the corners. <br>2. Tile laying details <br>In order to reduce problems with the floor, the floor tiles need to be laid carefully. Pay attention to the wall and floor tiles, and do not rush to the joints when laying dry, so as not to cause loose and uneven tiles, which will affect the construction effect. <br>3. Do not accumulate debris <br>Before the floor tile is dry, do not walk on it to accumulate debris, so as not to cause loose and uneven tiles. Use the floor protection film when it is dry.

1.前期清洁<br>在动工之前，先把地板扫干净，不要有杂物。然后取出地板膜，展开，撕开后面的厚膜。上面有胶水的那一面贴在瓷砖上。然后用手抚平，注意边角不要起翘即可。<br>2.瓷砖铺设细节<br>为了减少地板方面有问题，那么需要认真铺设地砖。要注意墙面地砖，铺设不干时不要急于接缝，以免造成瓷砖松动、不均匀，影响施工效果。<br>3.不要堆积杂物<br>在地面瓷砖干燥之前，不要走在它上面堆积杂物，以免造成瓷砖松动、不均匀。等到干了再来使用地板保护膜。

1. Preliminary cleaning<br>Before starting the construction, clean the floor first and do not have any sundries. Then take out the floor film, unfold and tear off the thick film at the back. The side with glue on it is pasted on the tile. Then use your hand to smooth it, and pay attention not to raise the corner.<br>2. Tile laying details<br>In order to reduce the floor problems, we need to lay the floor tiles carefully. Pay attention to the wall and floor tiles, and do not rush to the joint when the laying is not dry, so as to avoid loosening and uneven tiles and affecting the construction effect.<br>3. Do not pile up sundries<br>Before the floor tiles are dry, do not walk on them to accumulate sundries, so as to avoid loosening and uneven tiles. Wait until it's dry before using the floor protection film.<br>