4、水电改造，安排好每个空间的用途 水电改造是最重要的环节，一定要确定

4. Hydropower transformation, arrange the use of each space <br>Hydropower transformation is the most important link, we must determine the exact location of switches, lamps, washbasins, bathtubs, washing machines, etc. Before the renovation of water and electricity, the cabinet designer should come to the door for the first measurement to help you determine the transformation plan of the power supply and waterway. The water heater is also best to send someone to design the location of the power supply and the water connection according to the model you have determined. Reminder: It is best to leave a power socket on the wall below the sink to facilitate the installation of kitchen treasures. The air conditioning hole and power supply should be placed on this wall at the head of the bed as much as possible to avoid the air conditioner blowing directly at people in the future. Strong electricity and weak points should be kept at a distance of 20 cm. For example, a distance of 20 cm should be left between the socket and the network cable.

4、水电改造，安排好每个空间的用途<br> 水电改造是最重要的环节，一定要确定好开关、灯具、台盆、浴缸、洗衣机等等确切的位置。水电改造前，橱柜设计师应上门进行第一次测量，帮你确定好电源、水路的改造方案。热水器，也最好派人来根据你所确定的型号，设计好电源、上下水接口的位置。提醒：水盆下面的墙上，最好留电源插座，方便装厨宝。空调洞和电源尽量放在床头的这面墙上，避免以后空调直接对着人吹。强电和弱点要保持20公分的间距，例如，插座和网线间要留20公分距离。

4. Water and electricity transformation, arrange the use of each space<br>Water and electricity transformation is the most important link, we must determine the exact location of switches, lamps, basins, bathtubs, washing machines and so on. Before the transformation of water and electricity, the cabinet designer should carry out the first measurement at the door to help you determine the transformation plan of power supply and water circuit. For water heater, it is better to send someone to design the position of power supply, water inlet and water outlet according to the model determined by you. Reminder: on the wall under the water basin, it's better to leave a power socket for the convenience of installing kitchen treasures. The air conditioning hole and power supply should be placed on the wall at the head of the bed as far as possible, so as to avoid the air conditioning blowing directly at people in the future. Keep a distance of 20cm between strong electricity and weak points. For example, keep a distance of 20cm between socket and network cable.