高手在民间。这个压缩机修理涉及到机电仪焊角磨机等知识。开盖，拆卸，清洗

The master is in the folk. This compressor repair involves knowledge such as electromechanical welding angle grinders. Uncovering, disassembling, cleaning, reinstalling, and capping bolts require certain knowledge. In the past, when I was doing machine repairs, we usually did markings on large parts before disassembling, so that they can be easily identified when reinstalling. Location. This master did not draw a line, he should be a master. When he closed the cap, the bolts were tightened diagonally. And I don’t know why we don’t use sub-arc welding, but use electric welding to cover. In addition, the cover was welded to death without testing, indicating that this master is an expert and very confident in his ability to repair the compressor. great!

Experts are among the people. This compressor repair involves electromechanical instrument, welding, angle grinder and other knowledge. It requires some knowledge to open the cover, disassemble, clean, reinstall and seal the bolts. In the past, when I was doing machine repair, we generally made marking and engraving for large parts before disassembly, so that we can easily find the position during reassembly. The master didn't draw a line. He should be an old master. When he sealed the cover, the upper bolt was tightened diagonally. And I don't know why we don't use sub arc welding, but use electric welding to cover. In addition, the cover was welded to death without test and detection, which shows that the teacher is an expert and is very confident in his ability to repair the compressor. fabulous!<br>

Master in the folk. This compressor repair involves the knowledge of electromechanical instrument welding angle grinder, etc. Opening, disassembling, cleaning, reassembling, and capping bolts require a certain amount of knowledge. In the past, when I did mechanical repair, we usually made a line marking for large parts before disassembly, so that when reassembling, we could easily find the correct position. The master didn't draw a line, so he should be an old master. When he sealed the block, the upper bolts were tightened diagonally. And I don't know why I don't use sub-arc welding, but use electric welding to cover the block. In addition, the seal was welded to death without testing, which shows that the old master is an expert and is very confident in his ability to repair the compressor. Awesome!