1.将软包电池背面2条双面胶离型纸撕掉，如图1；2.再将IO板组件放置

1. Tear off the 2 strips of double-sided adhesive release paper on the back of the soft pack battery, as shown in Figure 1. <br>2. Place the IO board assembly on the lithium battery attachment tooling, and insert the IO board to the bottom of the tooling, as shown in Figure 2; <br>3 .The soft pack battery is attached along the edge of the tooling (left and lower edge), the attachment is completed as shown in Figure 3. Remove the IO board and attach the battery to the left and right edges of the IO board and the metal edge below it.

1. Tear off 2 double-sided adhesive paper on the back of the soft-pack battery, figure 1;<br>2. Then place the IO board assembly on the lithium battery attached to the work assembly, the IO board needs to be inserted into the bottom of the work assembly, as shown in Figure 2;<br>3. The soft-pack battery is attached along the edge of the tooling (left and bottom edge) and is attached to figure 3. Remove the IO plate and attach note that the battery must not exceed the left and right edges of the IO board and the metal edges below.

1. Tear off two strips of double-sided adhesive release paper on the back of soft bag battery, as shown in Figure 1;<br>2. Place the IO board assembly on the lithium battery attachment tooling, and insert the IO board into the bottom of the tooling, as shown in Fig. 2;<br>3. The soft package battery is attached along the tooling edge (left and lower edge), and the attachment is completed as shown in Fig. 3. Remove the IO board and attach it. Pay attention that the battery should not exceed the left and right edges of the IO board and the metal edge below.<br>