1.取待测主板，将待测板卡放入测试托盘(如图2、3)，注意板卡方向。2

1. Take the motherboard to be tested, put the board to be tested into the test tray (Figure 2 and 3), pay attention to the direction of the board. <br>2. From left to right (marked 1, 2, 3 in Figure 2), after the motherboard is placed, press the green button of the tooling to run the tooling automatically, and press down the test needle board (as shown in Figure 4 and Figure 5). <br>3. The tooling scanning head automatically scans the motherboard board number to the ICT test software board number scanning window 1, 2, 3, and the ICT test software starts testing. <br>4. After the test is completed, the tooling automatically exits, and the motherboard after the test is removed.

1. Take the motherboard to be tested, put the board card into the test tray (Figure 2, 3), pay attention to the direction of the board.<br>2. From left to right (Figure 2 marked 1, 2, 3), after the motherboard is placed, press the workwear green button for automatic operation of the workwear, press down on the test needle plate (Figure 4, Figure 5).<br>3. The workwear scan head automatically scans the motherboard number to the ICT test software board number scan window 1, 2, 3, and the ICT test software starts testing.<br>4. After the test is completed, the assembly automatically exits and removes the motherboard that the test is complete.

1. Take the motherboard to be tested, put the board to be tested into the test tray (as shown in Fig. 2 and 3), and pay attention to the direction of the board.<br>2. From left to right (1, 2, 3 indicated in Fig. 2), after the mainboard is placed, press the green button of tooling, and press down the test needle plate (as shown in Fig. 4 and Fig. 5).<br>3. The tool scanning head automatically scans the board number of the main board to the scanning window 1, 2 and 3 of the ICT test software, and the ICT test software starts the test.<br>4. After the test is completed, the tooling will exit automatically and take down the main board after the test.<br>