在家庭装修中,我们会根据功能空间的不同,来选择合适的室内门来安装,其中

In the home decoration, we will choose the appropriate indoor door to install according to the different functional space. Among them, the sliding door is a commonly used one. It is mostly used as a kitchen door, balcony door, etc., and even the even door and cloakroom door will use sliding Doors, but these generally do not need to be equipped with door locks, and kitchen doors and balcony doors are usually installed with door locks considering the safety of life. <br><br><br>Sliding door lock, simple mechanical structure, stable operation, according to personal pursuit of quality of life, different panel styles, functional settings and electroplating finishes can be selected. Generally used with wooden sliding doors and metal sliding doors. Processing technology: lock surface Generally, it is made of zinc alloy die-casting materials, the surface must be uniform in color, and the pattern must be clear. The lock body shell is generally made of high-quality steel, solid zinc alloy die-cast cross rotor, solid zinc alloy die-cast hook, etc. <br><br><br>The installation steps of sliding door locks <br>1, first Put the sliding door lock on the frame of the door, and then measure the installation position, then screw and tighten the screw, and then check whether the lock body is swinging or unstable. If so, pay attention to adjustment. In addition, a relatively low door track sliding door lock can be installed, and the advantage is that there is no need to punch or cut. <br>2. Clean the bottom of the sliding door to ensure smooth sliding. If there is dust on the track, it will affect the use of the door lock. If you see the dirty place, use a rag to remove it in time. If it is not easy to clean, you can use an exciter to scrub and clean the track. <br>3. Cut a small piece of non-slip tape and place it near the edge of the bone door. When the door is closed, it is the rail side channel, which can provide more grip, because it has a metal lock channel for easy door lock grip. The thumb screw of the door lock should be securely fixed under the blow. <br>4. Use a screwdriver to tighten the screws and lock them on the edge of the sliding door to prevent them from being opened. After installation, debug the door lock to see if there is any unevenness or partial jam. If it is normal, you can directly tighten the screws, and then Insert the key, and then use the key to punch out the hook. After debugging, it can be used normally without any problems.

In the home decoration, we will be based on the function of different space, to choose the appropriate indoor door to install, where the push and pull door is a commonly used one, mostly used as a kitchen door, balcony door, and so on, even the clothes door, cloakroom door will choose the push and pull door, but these do not need to be equipped with door locks, and kitchen doors and balcony doors consider the safety of life, usually will be installed door locks.<br><br>Push and pull door lock, simple mechanical structure, stable operation, according to the pursuit of personal quality of life, choose different panel styles, functional settings and electroplating finishes. Generally used with wood moving doors and metal moving doors. Processing process: the lock surface is generally made of zinc alloy die-casting material, the surface must be uniform color, clear pattern, lock body shell is generally made of high-quality steel, solid zinc alloy die-cast cross rotor, solid zinc alloy die-cast hook tongue and so on.<br><br>The installation procedure for pushing and pulling the door lock<br> 1, first put the push and pull door lock on the frame of the door, and then measure the installation position, and then put the screw on and tight, and then check the lock body whether there is a wave instability phenomenon, if there is attention to adjust. A lower door track sliding door lock can also be installed, with the advantage that no holes or cuts are required.<br> 2, clean the bottom of the push and pull door, to ensure that the push and pull smoothly without obstruction. If the track has dust will shadow to the use of door locks, see dirty places in time with rags淸<br> 3, cut a small piece of anti-slip tape placed near the edge of the bone door 緣, when the door is closed it is the rail side channel, can provide more grip, because it has a metal lock, easy to lock the door. The thumb screws of the door lock should be securely secured under the blow.<br> 4, the use of screwdriver screws tightened fixed, locked in the edge of the push and pull door 緣, to prevent being opened, after installation debugging the door lock, to see if there is a smooth or partial card situation, normal words can be directly tightened screws, and then the key inserted, and then with the key to the hook tongue out, after debugging no problem can be used normally

In the family decoration, we will choose the appropriate indoor door to install according to the different functional space. The sliding door is commonly used as kitchen door, balcony door and so on. Even the clothes door and cloakroom door will choose the sliding door. However, there is no need to equip the door lock, and the kitchen door and balcony door usually install the door lock when considering the safety of life.<br>Sliding door lock, simple mechanical structure, stable operation, can be selected according to personal pursuit of quality of life, different panel styles, function settings and electroplated surface decoration can be selected. Generally, wooden sliding door and metal sliding door are used. Processing technology: the lock surface is generally made of zinc alloy die-casting material, the surface must be uniform in color and clear in pattern, and the lock body shell is generally made of high-quality steel, Solid zinc alloy die casting cross rotor, solid zinc alloy die casting knuckle, etc<br>Installation steps of sliding door lock<br>1. First put the sliding door lock on the door frame, then measure the installation position, and then screw on and tighten, and then check whether the lock body has swing instability. If so, pay attention to adjustment. In addition, it can also install a lower door rail sliding door lock, with the advantage of no need to punch or cut.<br>2. Clean the bottom of the sliding door to ensure that the sliding is smooth and unobstructed. If there is dust on the track, it will affect the use of the door lock. If you see the dirt, clean it with a cloth. If it is not easy to clean, you can use exciter to clean the track.<br>3. Cut a small piece of anti-skid tape and put it near the edge of the bone door. When the door is closed, it is a rail side channel, which can provide more grip, because it has a metal lock channel, which is convenient for the lock to hold tightly. The thumb screw of door lock should be fixed safely under impact.<br>4. Use screws to tighten the screws and lock them on the edges of the sliding doors to prevent them from being opened. After installation, debug the door locks to see if there are any unsmooth or partial cards. If you are normal, you can tighten the screws directly, then insert the keys and use the keys to play the hooks.<br>