在相同的载荷下，10英尺机工作台和滑块出现的挠变是5英尺机的4倍。这就

Under the same load, deflections machine table and the slider 10 feet appear four times five feet of the machine. That is, the shorter the machine requires less shimming can produce qualified parts. Reduce shimming will shorten the preparation time. Of course, the material properties of the workpiece is a key factor. Compared with low carbon steel, stainless required load typically increases about 50%. Most grades of soft aluminum load needs to be reduced by about 50%.

Under the same load, the 10-foot machine bench and slider are four times more flexible than the 5-foot machine. This means that shorter machines require fewer gasket adjustments to produce qualified parts. Reducing gasket adjustments will reduce preparation time. Of course, the nature of the workpiece material is also a key factor. Compared to low-carbon steel, stainless steel typically requires about 50% more load. Most grades of soft aluminum loads need to be reduced by about 50%.

Under the same load, the deflection of the worktable and slide of the 10 foot machine is 4 times that of the 5 foot machine. That is to say, shorter machines need less gasket adjustment to produce qualified parts. Reducing the gasket adjustment will shorten the preparation time. Of course, the material property of workpiece is also a key factor. Compared with low carbon steel, stainless steel usually needs about 50% more load. The load of most brands of soft aluminum needs to be reduced by about 50%.<br>