采购部反馈，供应商改进完成节点为8月1日，要求入厂质量检验科实施验证控

According to the feedback from the purchasing department, the supplier's improvement completion node was August 1, and the incoming quality inspection department was required to implement verification control. On August 9, the incoming product was tested and verified. The test was still unqualified, and unqualified was issued for the unqualified parts. Appraisal form, return processing, request parts and components planning department to transfer qualified parts for inspection. On August 10th, the parts were re-adjusted and the inspection was still unqualified. The review opinions of the Parts Planning Division were accepted. However, after communicating with the technical center, the technical feedback was not allowed to be used. The review process was consistent and the approval was not signed. The plan is suspended. Until August 18, the Parts Planning Department and Purchasing Department communicated and negotiated with the Technical Center, and the Technical Center gave concessions to receive opinions, and used the pin for testing. The pin can be easily inserted into the pin hole for use. All inspections with pin shafts meet the requirements, and storage has been processed normally.

Procurement Department feedback, supplier improvement completion node for August 1, requiring the factory quality inspection section to implement verification control, August 9 to implement inspection and verification of the product, testing is still unqualified, for non-conforming parts issued a non-conforming evaluation form, return processing, requiring parts planning section to transfer qualified parts for inspection. August 10 from the new transfer, testing is still unqualified, parts planning section review opinion concessions received, but after communication with the technical center, technical feedback is not allowed to use, the review process unanimously did not sign approval, resulting in the production of missing parts line, will be scheduled to be suspended. Until August 18, the parts planning section and procurement department and the technical center of communication and consultation, the technical center to give concessions to receive advice, with the pin shaft for testing, pin shaft can easily penetrate the pin shaft hole can be used. With the pin shaft detection are in line with the requirements, has been normally processed into storage.

According to the feedback of the purchasing department, the completion node of the supplier improvement is August 1, and the quality inspection department of the factory is required to implement the verification control. On August 9, the inspection and verification of the arrived products are carried out, and the inspection is still unqualified. For the unqualified parts, a non-conforming review sheet is issued, and the returned products are required to be sent for inspection by the planning department of spare parts. On August 10, the new parts were transferred, and the inspection was still unqualified. The review opinions of the parts planning department were accepted by concession. However, after communication with the technical center, the technical feedback was not allowed to be used. The review process was consistent and the approval was not signed. As a result, the production of missing parts was stopped and the plan was suspended. Until August 18, the parts planning department and the procurement department communicated with the technical center, and the technical center gave the concession acceptance opinion, and the pin shaft was used for inspection. The pin shaft can easily penetrate into the pin hole and can be used. All of them meet the requirements and have been put into storage normally.<br>