粘结力测试合格后需要对测试部位进行修复，并再次对测试部位进行电火花检漏

粘结力测试合格后需要对测试部位进行修复，并再次对测试部位进行电火花检漏。聚丙烯增强纤维冷缠胶带（选择丁基胶型，搭接50-55%双层缠绕，总厚度≥2.2mm），聚丙烯缠绕带与热收缩带防腐层的搭接宽度应不小于100mm。聚丙烯缠绕带应对焊口进行缠绕。聚丙烯缠绕带的施工可采用人工机械缠绕或自动缠绕机械缠绕。施工方法及工艺应符合材料说明书的要求，缠带施工应连续作业，不得隔夜。施工后缠绕带的整体性能应满足B文件的所有要求。

0/5000

源语言: -

目标语言: -

结果 (英语) 1: [复制]

复制成功！

After the adhesion test is passed, the test site needs to be repaired, and the test site is again tested for spark leaks. Polypropylene reinforced fiber cold-wound tape (choose butyl rubber type, lap 50-55% double-layer winding, total thickness ≥2.2mm), lap width of polypropylene wound tape and heat shrinkable tape anticorrosion layer should not be less than 100mm Polypropylene winding tape should be used to wind the weld. The construction of polypropylene winding tape can use manual mechanical winding or automatic winding mechanical winding. The construction method and process should meet the requirements of the material specification, and the construction of the tape winding should be continuous and not overnight. The overall performance of the winding tape after construction should meet all the requirements of the B document.

正在翻译中..

结果 (英语) 2:[复制]

复制成功！

After the bonding force test is qualified, the test site needs to be repaired and the test site is again electro-spark detection. Polypropylene reinforced fiber cold-wrapping tape (choose butyl gum type, tie 50-55% double-layer winding, total thickness of 2.2mm), polypropylene winding belt and heat shrink belt anti-corrosion layer of the bondwidth width should not be less than 100mm. The polypropylene winding belt should be winded around the weld. The construction of polypropylene winding belt may be constructed by artificial mechanical winding or automatic winding of mechanical winding. Construction methods and processes should comply with the requirements of the material specification, tangled construction should be continuous work, not overnight. The overall performance of the winding belt after construction should meet all the requirements of the B document.

正在翻译中..

结果 (英语) 3:[复制]

复制成功！

After the adhesion test is qualified, the test part needs to be repaired, and the test part needs to be detected again by spark. Polypropylene reinforced fiber cold winding tape (choose butyl rubber type, lap 50-55% double-layer winding, total thickness ≥ 2.2mm ）The overlapping width of polypropylene winding tape and heat shrinkable tape anti-corrosion coating shall not be less than 100mm. Polypropylene winding tape shall be used to wind the welded junction. The construction of polypropylene winding tape can adopt manual mechanical winding or automatic mechanical winding. The construction method and process shall meet the requirements of the material specification, and the tape wrapping construction shall be carried out continuously without overnight. After construction, the overall performance of winding tape shall meet all requirements of document B.

正在翻译中..

其它语言

本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.