超载是任何设备和仪器设备都不允许的！在使用过程中，超载的情况会极易引发

Overloading is any device and equipment are not allowed! During use, it can easily lead to overloading of equipment failure. The worst case, can cause accidents. Overload can cause a lot of problems, the most common motor stops working and fuse the fracture. Motor stops working, it needs to be addressed immediately. If the situation can be found to deal with the overload by reducing the amount of depression of the roll, this point should be to address such problems have to do.

Overloading is not allowed by any equipment and instruments! Overloading can easily cause equipment failure during use. In severe cases, a safety incident may occur. Overloading can cause a lot of problems, the most common of which is when the motor stops and the fuse breaks. If the motor stops working, it needs to be processed immediately. If overloading is found to be handled by reducing the down pressure of the upper roller, this should be the necessary to deal with such problems.

Overload is not allowed for any equipment and instrument! In the process of use, overload will easily lead to equipment failure. If it is serious, it may cause safety accidents. Overload can cause many problems, the most common of which are motor stop and fuse break. When the motor stops working, it needs to be dealt with immediately. If it is found that the overload can be dealt with by reducing the pressure of the upper roller and the lower roller, this should be done to deal with such problems.<br>