6.10.2生产区料储存规定:6.10.2.1生产区材料应尽速使用,避免存放时间过长,长期储存时仍依各项材料之特性管制。 6.10.3准成品的英语翻译

6.10.2生产区料储存规定:6.10.2.1生产区材料应尽速使用,避

6.10.2生产区料储存规定:6.10.2.1生产区材料应尽速使用,避免存放时间过长,长期储存时仍依各项材料之特性管制。 6.10.3准成品储存规定:6.10.3.1准成品储存有效期限管理:6.10.3.1.1准成品依产品胶管上印刷周期计算,产品有效期为一年。6.10.3.1.2有效期超过一年的产品,移入长期库存区,长期库存区产品储存时间不可超过二十四个月(以一年有效期之后算起), 当长期库存区产品在储存时间内有订单需求时,仓管员取样送实验室作寿命验证,寿命合格的则退回产线进行重工处理,寿命不合格则不能消化时,由仓库提出申请转入不良品仓按不合格品处理流程处理。6.10.3.1.3仓管员需对所管辖储位帐目进行不定时盘点,在盘点过程中需对仓库内过期库存进行清理统一放置于长期库存区内并知会生管消化库,在长期库存区内的产品超过有效期后每年度抽检一次, 有加工包装工单需求的,经QC判定参数OK.此产品退产线进行重工,重工后的良品入准成品仓再用加工包装工单发至制造单位加工包装,参数判定NG,则该批产品进行隔离,放入“异常品”区,并由产线品保人员开立8D报告呈上级处理。6.10.3.1.4准成品入库用兰色胶箱包装产品不能超过箱深的4/5,高压大¢数(16¢以上)准成品需加垫EV棉以避免产品压偏与导针压弯。6.10.3.1.5 环境有害物超标时按照《环境管理物质规定》之异常处理流程处理;产品有效期限为重工后之检查日期,六个月内有效。 6.10.3.1..6如加工包装工单上客户对产品生产周期有特殊要求者,则按客户特殊要求执行。6.10.3.2准成品仓储存环境应维持通风良好之状况,必要时安装轴流风机,对仓库空气进行置换,且仓储空间应作适当合理之划分,同类型按指定储位放置,并作有顺序之排列。
0/5000
源语言: -
目标语言: -
结果 (英语) 1: [复制]
复制成功!
6.10.2 material production area storage requirements: <br>6.10.2.1 material production areas as soon as possible, to avoid long storage time, Rengyi properties of the materials regulated long-term storage. <br>6.10.3 quasi-finished product storage requirements: <br>6.10.3.1 quasi-finished product storage expiration date management: <br>6.10.3.1.1 quasi-finished goods calculated in accordance with the print cycle on the hose, the product is valid for one year. <br>6.10.3.1.2 valid for more than one year of product inventory area into long-term, long-term product inventory area storage time should not exceed twenty-four months (in a year after the validity date), when long-term products in the inventory area storage time when the order demand, the warehouse keeper sample sent to the laboratory for validation life, life is returning qualified production lines processing heavy industry, life can not fail to digest proposed by the warehouse application into the warehouse by defective products defective processing flow . <br>6.10.3.1.3 Warehouse workers need of storage spaces under the jurisdiction of the accounts carried out from time to time inventory, expired inventory in the warehouse need to clean up the inventory process unified placed in the area and notify the stock long-term health management digestion library, in the long term Stock product area of the sampling period than once a year, with a work order processing and packaging requirements, determined by the QC parameter OK. Related production line back heavy, heavy yield the product warehouse and then processed into a quasi-single Packers manufacturing units to processing and packaging, the NG determination parameters, then the product isolated, placed in the "abnormal items" area, production line quality assurance personnel by opening 8D report showed superior process. <br>6.10.3.1.4 quasi-product storage tank with a blue plastic packaging box can not exceed 4/5 of the depth, a large number ¢ high pressure (above 16 ¢) registration EV finished padded cotton need to avoid the partial pressure of the product with the guide acupressure bend. <br>6.10.3.1.5 environmental hazards accordance with the "predetermined environment-related substances" is exceeded when the exception processing flow; product inspection expiration dates of the heavy, valid for six months. <br>6.10.3.1..6 such as a work order processing and packaging customers have special requirements for the production cycle, press the special requirements of customers to perform.<br>6.10.3.2 quasi finished storage environment should be kept in good condition ventilated, mounted axial fan, if necessary, replacement air warehouse, and the storage space should be divided appropriately reasonable, placed with the same type of storage spaces, and for sequential the arrangement.
正在翻译中..
结果 (英语) 2:[复制]
复制成功!
6.10.2 Provisions for the Storage of Materials in production areas: <br>6.10.2.1 Materials in the production area should be used as soon as possible to avoid excessive storage time and to be subject to the characteristics of the materials for long periods of time.<br>6.10.3 Storage of quasi-finished products:<br>6.10.3.1 Administration of the expiration date for storage of quasi-finished products:<br>6.10.3.1.1 The quasi-finished product is calculated according to the printing cycle on the product hose, and the product is valid for one year. 6.10.3.1.2 Products valid for more than one year, moved into long-term inventory area, long-term inventory area product storage time may not exceed twenty-four months (from one year after the validity period), when the long-term inventory area products in the storage time there is an order demand, warehouse manager sampling to the laboratory for life verification,<br>The life of qualified return to the production line for heavy work treatment, life is not qualified to digest, from the warehouse to apply for transfer to the bad goods warehouse according to the non-conforming product processing process. 6.10.3.1.3 The warehouse manager shall take stock of the accounts of the storage positionunder under his jurisdiction from time to time, and in the course of the inventory shall clean up the expired inventory in the warehouse and place it uniformly in the long-term inventory area and to inform the health pipe digestion bank, the products in the long-term inventory area shall be inspected once a year after the expiration date, and there is a demand for processing packaging work orders,<br>After THE QC determines the parameterOK. This product exit line for heavy work, heavy work after the good products into the quasi-finished product warehouse and then with the processing packaging work order issued to the manufacturing unit processing packaging, parameters to determine NG, the batch of products isolated, put into the "exceptional products" area, and by the production line product protection personnel to open an 8D report to the superior processing.<br>6.10.3.1.4 quasi-finished products into the warehouse with blue plastic box packaging products can not exceed the depth of the box 4/5, high-pressure large number (16 x above) quasi-finished products need to be padded EV cotton to avoid product bias and needle bending. <br>6.10.3.1.5 When environmental hazards exceed the standard, it shall be handled in accordance with the abnormal handling process of the Environmental Management Substances Regulations;<br>6.10.3.1..6 If the customer has special requirements for the product production cycle on the processing and packaging work order, it shall be carried out according to the special requirements of the customer. 6.10.3.2 The storage environment of the quasi-finished warehouse shall maintain a well-ventilated condition, install axial wind turbines if necessary, replace the warehouse air, and the storage space shall be properly and reasonably divided, the same type shall be placed in the designated storage location, and shall be arranged in order.
正在翻译中..
结果 (英语) 3:[复制]
复制成功!
6.10.2 regulations on material storage in production area:<br>6.10.2.1 the materials in the production area shall be used as soon as possible to avoid long storage time. The long-term storage shall still be controlled according to the characteristics of various materials.<br>6.10.3 storage regulations for semi-finished products:<br>6.10.3.1 shelf life management of semi-finished products storage:<br>6.10.3.1.1 the quasi-finished product is calculated according to the printing cycle on the product rubber tube, and the product validity is one year.<br>6.10.3.1.2 products with a validity period of more than one year shall be moved into the long-term inventory area. The storage time of products in the long-term inventory area shall not exceed 24 months (calculated after the one-year validity period). When there is an order demand for products in the long-term inventory area within the storage time, the warehouse keeper shall take samples and send them to the laboratory for life verification. If the life is qualified, they shall be returned to the production line for rework. If the life is unqualified, they cannot be eliminated. At the time of transformation, the warehouse shall apply for transferring to the defective product warehouse according to the non-conforming product processing flow.<br>6.10.3.1.3 the warehouse keeper shall make an irregular inventory of the accounts of the storage location under his jurisdiction. During the inventory process, the overdue inventory in the warehouse shall be cleared and placed in the long-term inventory area and the production management and digestion warehouse shall be informed. After the products in the long-term inventory area exceed the validity period, the sampling inspection shall be carried out once a year. If there is a demand for processing and packaging work order, the QC determines that the parameter is OK. The products shall be returned to the production line for rework. After the work, the good products will be sent to the quasi finished product warehouse for processing and packaging, and then the processing and packaging work order will be sent to the manufacturing unit for processing and packaging. If the parameter is determined as ng, the batch of products will be isolated and put into the "abnormal products" area, and the product line quality assurance personnel will issue an 8D report to the superior for handling.<br>6.10.3.1.4 the products packed in blue plastic box shall not exceed 4 / 5 of the box depth when the quasi-finished products are put into storage. The quasi-finished products with high pressure and large ¢ number (16 ¢ or above) shall be padded with EV cotton to avoid product deviation and guide pin bending.<br>6.10.3.1.5 if the environmental hazardous substance exceeds the standard, it shall be handled according to the abnormal handling process specified in the regulations on environmental management substances; the product validity period is the inspection date after heavy work, and it is valid within six months.<br>6.10.3.1..<br>6.10.3.2 the storage environment of the semi-finished product warehouse shall be well ventilated. If necessary, axial flow fans shall be installed to replace the air in the warehouse, and the storage space shall be properly and reasonably divided. The same type shall be placed according to the designated storage location and arranged in sequence.<br>
正在翻译中..
 
其它语言
本翻译工具支持: 世界语, 丹麦语, 乌克兰语, 乌兹别克语, 乌尔都语, 亚美尼亚语, 伊博语, 俄语, 保加利亚语, 信德语, 修纳语, 僧伽罗语, 克林贡语, 克罗地亚语, 冰岛语, 加利西亚语, 加泰罗尼亚语, 匈牙利语, 南非祖鲁语, 南非科萨语, 卡纳达语, 卢旺达语, 卢森堡语, 印地语, 印尼巽他语, 印尼爪哇语, 印尼语, 古吉拉特语, 吉尔吉斯语, 哈萨克语, 土库曼语, 土耳其语, 塔吉克语, 塞尔维亚语, 塞索托语, 夏威夷语, 奥利亚语, 威尔士语, 孟加拉语, 宿务语, 尼泊尔语, 巴斯克语, 布尔语(南非荷兰语), 希伯来语, 希腊语, 库尔德语, 弗里西语, 德语, 意大利语, 意第绪语, 拉丁语, 拉脱维亚语, 挪威语, 捷克语, 斯洛伐克语, 斯洛文尼亚语, 斯瓦希里语, 旁遮普语, 日语, 普什图语, 格鲁吉亚语, 毛利语, 法语, 波兰语, 波斯尼亚语, 波斯语, 泰卢固语, 泰米尔语, 泰语, 海地克里奥尔语, 爱尔兰语, 爱沙尼亚语, 瑞典语, 白俄罗斯语, 科西嘉语, 立陶宛语, 简体中文, 索马里语, 繁体中文, 约鲁巴语, 维吾尔语, 缅甸语, 罗马尼亚语, 老挝语, 自动识别, 芬兰语, 苏格兰盖尔语, 苗语, 英语, 荷兰语, 菲律宾语, 萨摩亚语, 葡萄牙语, 蒙古语, 西班牙语, 豪萨语, 越南语, 阿塞拜疆语, 阿姆哈拉语, 阿尔巴尼亚语, 阿拉伯语, 鞑靼语, 韩语, 马其顿语, 马尔加什语, 马拉地语, 马拉雅拉姆语, 马来语, 马耳他语, 高棉语, 齐切瓦语, 等语言的翻译.

Copyright ©2024 I Love Translation. All reserved.

E-mail: