工作台向上翻转：在触摸屏内设定向上翻转时间，比如10秒（具体以现场操作

Turn the worktable upwards: Set the upward turning time in the touch screen, such as 10 seconds (specific on-site operation shall prevail). <br>When the beam reaches the rear limit and the grinding plate reaches the upper limit, press this button and the worktable will start to turn upwards, and stop turning up after the set time is reached. Press this button again, and the worktable will turn upwards. <br>Turn down the workbench: Set the time for turning down in the touch screen. <br>When the beam reaches the rear limit and the grinding plate reaches the upper limit, press this button and the worktable will start to turn down. <br>Workbench stop: In any running state, press this button to stop the workbench. <br>After power on, the following screen will be displayed. <br>System number: 000000 displays the serial number of the machine. <br>Press "" to enter the English main screen. <br>The following is a detailed description with English screen. <br>This screen can set the walking time and cycle times of 4 working modes, and display the current working mode and the number of cycles that have been carried out.

Workstable flip up: Set the up flip time within the touch screen, such as 10 seconds (depending on field operation).<br>When the beam reaches the post-limit and the grinding disc reaches the upper limit, press this button to start flipping up, turn up to the set time and stop turning up, then press this button, the workstation to move up and down.<br>Workst desk flip down: Set the turn down time in the touch screen.<br>When the beam reaches the rear limit and the grinding disc reaches the upper limit, press this button to start flipping down the workstation.<br>Workstation stop: The workstation stops when it is in any operating state, press this button.<br>The following screen is displayed when power is on<br>System number: 0000000 displays the system series number.<br>Press the key to enter the main english screen.<br>The following is a detailed description in English.<br>This screen sets the walking time and the number of cycles for the four operating modes, and shows the current operating mode and the number of cycles that have been completed.

Worktable up flip: set the time of turning up in the touch screen, such as 10 seconds (the specific operation shall prevail).<br>When the crossbeam reaches the back limit and the grinding plate reaches the upper limit, press this button to start turning up the worktable. After turning up to the set time, it stops turning up. Press this button again, and the worktable will turn up by inching.<br>Table flip down: set the time for turning down in the touch screen.<br>When the crossbeam reaches the back limit and the grinding plate reaches the upper limit, press this button and the worktable starts to turn down.<br>Worktable stop: press this button to stop the worktable in any running state.<br>After power on, the following screen is displayed<br>System number:000000 Display the serial number of the machine.<br>Press "" to enter the English main screen.<br>The following is a detailed description in English.<br>This screen can set the travel time and cycle times of four working modes, and display the current working mode and the number of cycles.<br>